The Davies Craig Digital Electric Fan Controller Kit 0444 is designed to turn on fans by sensing air temperature as it passes through the radiator with the sensor placed in the radiator fins, so there is no need to cut hoses. It has an adjustable temperature range of 104 to 230º Fahrenheit / 40 to 110º Celsius and can display Centigrade or Fahrenheit. Temperature is set by pressing the set button. The controller can run 1 or 2 fans. The second fan (if applicable) will start 10 seconds after the first fan starts. It can be operated thermally and can also be powered any time the air conditioning is on.
Technical Specifications:
- Max voltage: 15V
- Rated Continuous Current Draw 30 Amps
- Maximum Current Draw 40 Amps
- Maximum Start Up Current 60 Amps
- Relay setup: Dual relay
- Speed: Single speed - 10 second delay to start up the second fan
- Applications: works with single and dual fan applications
- Temperature Display: LED digital temp display - actual temperature + set temperature
- Temperature Display: Centigrade or Fahrenheit Temperature settings: 104 to 230º F (40 to 110º C)
- Temperature setting: Push Button
- Circuit type: Pre-programmed micro controller
- Output wires: Batt + Batt - IGN, AC Clutch, Fan #1, Fan #2 Thermistor Probe
- Dimensions: 3.75" x 2.6" x 2.2" (95 x 65 x 56 mm)
- You can use the A/C wire as a manual override by providing it with 12 Volts from a switch.
- 2 year warranty from Davies Craig
- IMPORTANT: Not designed to control Davies Craig Electric Water Pumps (EWP): to control an EWP use Davies Craig 8002
Kit Contents: Digital Fan Switch quantity 1, Thermal Sensor Probe quantity 1, Mounting Kit for Thermal Sensor Probe quantity 1, Red 6mm Ring Terminal quantity 1, Blue 6mm Ring Terminal quantity 1, Blue Wire Joiner quantity 2, Self Tap Screw quantity 2, Instructions quantity 1
Click here to shop my store!