Premium 20mm x 44mm Canvas Stretcher Bars Frames including Wedges

 

20mm deep with rounded edges. (See images)

Stretched canvases can lose tension over time. 

Slotted corner joints allow the customer to tap wooden wedges- supplied with each pair of stretcher bars- into the corner, opening it up very slightly and re-tensioning the canvas. This gives a crisp edge, with minimal risk of cracking the ink film.

 

Wooden wedges are included. (Two per pair)

 

No special tools are needed to assemble slotted stretcher bars.

 

We recommend a soft-faced hammer to tap the corners together.

 

Our stretcher bars are made to the highest specification and subject to careful quality control throughout production.

 

Special attention to the shaping of the bar and corner joints guarantees that all of our bars fit neatly together and lie flat against the wall.

 

All have a bevelled edge, meaning that the stretched canvas will not show an imprint of the bars, and are designed for a seamless fit at the corners.

 

Measure diagonals to check for squareness.

 

Careful machining of the slots means the bars slot together neatly and lie flat against the wall.

 

Made from finger-jointed slow growing Baltic pine.

 

Stretcher Bars of 762mm (30”) and longer have slots in the centre of the inner edge to take 34x14mm Brace Bars. 

 

34x14mm Brace Bars over 762mm (30”) are notched to cross at the centre and sit flush.

 

Please make your size selection from the drop down menu above.