Wolf Tooth T47 Internal Bottom Brackets are engineered to be smooth, durable, lightweight, fast, and user-serviceable. Our ground-up design features custom bearings, seals, bushings, and cups, which eliminate creaking and balance best-in-class weather sealing with optimized bearing radial compression, alignment, and preload for low drag. They're available for 24mm Shimano, 29mm DUB, and 30mm spindle diameters for maximum compatibility, and four colors to match your other Wolf Tooth Color Shop components. The bearings in Wolf Tooth Bottom Brackets feature a custom design. The balls and race are made from a hardened chrome bearing steel. This has a higher surface hardness than stainless, which improves the durability of bearing races and reduces spinning resistance and noise. An ACOSUR ZNA coating has also been applied to the race to provide corrosion resistance that is equal to or better than stainless steel after a 500-hour saltwater test. Bearing material paired with an extensive sealing system and the elimination of metal-on-metal contact means Wolf Tooth Bottom Brackets have superior performance in all conditions. Compatible with 24mm, 29mm DUB, and 30mm spindle cranksets Adjustable-width sleeve fits 85.5mm - 92mm T47 Internal bottom bracket shells Best-in-class weather sealing protects bearings from water, mud, and debris Custom polymer spindle bushings eliminate creaking Installation and removal with standard 52-16 spline tool Replacement parts and service guides available via Wolf Tooth Right to Repair Engineered, machined, and assembled at Wolf Tooth HQ in Minnesota, USA Lifetime warranty on the bearings Bottom brackets ship with the following shell and spindle spacers:. 2x 2.5mm shell spacers 24mm spindle 2x 0.5mm, 2x 1mm, 2mm, 3mm, 5mm 29mm spindle 2x 0.5mm, 2x 1mm, 3mm, 5mm, 7.5mm 30mm spindle 2x 0.5mm, 2x 1mm, 2mm, 3mm, 5mm Compatibility 85.5 - 92mm width T47 Internal bottom bracket shells Bottom bracket bearings sit inside the frame, with tooled flange for installation and removal sitting outside the frame Adjustable-width internal sleeve fits 85.5mm - 92mm T47 Internal bottom bracket shells Installation Installation and removal with standard 52-16 spline bottom bracket tool Tech Specs Weights: 24mm 103g | 29mm 96g | 30mm 91g (includes complete BB assembly without spacers) Material: 6061-T6 Aluminum, Glass-filled Nylon, NBR, EPDM, Urethane, Bearing ball material is AISI 52100 chrome bearing steel hardened to Rc 61-66, Bearing race material is AISI 52100 chrome bearing steel hardened to Rc 60-65. Made in the USA.29mm Raw Silver

• Bottom bracket also includeds: (2) 2.5mm shell spacers, (2) 0.5mm spindle spacers, (2) 1mm spindle spacers, (1) 3mm spindle spacer, (1) 5mm spindle spacer, and (1) 7.5mm spindle spacer
• Best-in-class sealing achieved by grouping a spindle o-ring, seals on the bearing/bushing gutter, inner and outer low contact bearing seals, shell o-rings, and a labyrinth-style end cap to ensure your bottom bracket will run smoothly no matter what conditions you ride in
• Custom bushings separate the bearing inner race and crank spindle to eliminate metal-on-metal contact, the leading cause of bottom bracket creaks, while also aiding in bearing longevity with an interface to the bearing gutter seal for maximum weatherproofing
• Custom AlSl 52100 chrome bearing steel hardened to Rc 61-66 reduces friction for smooth pedaling with ZNA corrosion-resistant coating
• Adjustable-width design allows the same shell to be used for 85.5mm - 92mm width T47 Internal Bottom Brackets
• Easy installation and removal using a standard spline 52-16 bottom bracket tool (Sold separately)