Cudy AP11000 BE11000 Tri-Band Wi-Fi 7 Access Point w 10Gb SFP+ – Brand New / Factory Sealed – FREE POSTAGE
Brand new and completely unused AP11000 / Cudy BE11000 high-performance Wi-Fi 7 wireless access point.
The unit remains factory sealed in its original polythene and has never been opened, installed or powered on.
Please note: there is a small tear/impact mark to the cardboard retail box underneath the intact outer polythene, presumably from handling in transit. This is shown clearly in the photographs. The external factory wrapping itself remains sealed and intact.
This is a seriously high-spec access point for the money. On headline hardware specification it sits in the same high-end Wi-Fi 7 territory as considerably more expensive business/prosumer access points (lookin' at you Ubiquiti U7 Pro), with tri-band Wi-Fi 7, multi-gigabit Ethernet and an unusually useful 10Gb SFP+ interface. Key specifications: • BE11000 tri-band Wi-Fi 7 • 6 spatial streams – 2×2 on 2.4 GHz, 5 GHz and 6 GHz • Up to 5765 Mbps on 6 GHz • Up to 4324 Mbps on 5 GHz • Up to 688 Mbps on 2.4 GHz • Wi-Fi 7 MLO (Multi-Link Operation) • Up to 320 MHz channel width • 4K-QAM • OFDMA and MU-MIMO • WPA3 support • Qualcomm 1.5 GHz quad-core processor • 512 MB DDR4 RAM • 1 × 2.5GbE RJ45 port with PoE input • 1 × 10Gb SFP+ interface • 802.3at PoE, passive PoE and DC power support (I don't think Cudy ships full mains adapter + plug in this package. But box says contents include "power jack", so it might) • Max power consumption 20 W, idle 12 W. • Up to 12 SSIDs • VLAN support • Cudy centralised multi-AP controller support • Manufacturer recommended capacity of up to 300 connected devices • Wall or ceiling mounting
Identifiers: PN: AP11000_EU V1.1 EAN-12 Code: 6971690793586 Serial number is partially obscured in the listing for purchaser's privacy. The serial number on the actual sealed product has of course not been altered or removed.
Power Note: The AP can be powered from a suitable 802.3at PoE+ switch or PoE injector, via 48–57 V passive PoE, or from a suitable 12 V / 2 A DC supply using its DC power jack.
No power adaptor or PoE injector is included in the standard AP11000_EU package as far as I'm aware (box factory sealed) — the factory-printed package contents list the access point, mounting kit and quick installation guide only. Buyers not powering it from a PoE-capable switch will therefore need a suitable separate power supply/injector.
--
This model is currently selling for around £150 on Amazon, so this is an opportunity to pick up a genuinely high-spec Wi-Fi 7 AP for bargainz.
Reason for sale: surplus to requirements following a change to my planned network setup.
Please see photos for the exact cosmetic condition of the retail packaging before purchasing.