rabbitgoo Stained Glass Window Film Rainbow Lattice Static Cling Decal Removable
About the item:
Note:
1.The window film works only on flat, clean, and smooth surfaces. It will not stick on plastic, broken, or uneven surfaces.
2.Do not suggest installing the privacy window film on a double-pane window that will be exposed to the strong sunlight for a long time.
3.The decorative window film itself does not actually have any color. However, with special 3D laser design it will show a colorful visual effect when sunlight hits the privacy film after installation; You may put it in the sunlight, the more light it has, the more color it will have.
Package Included: 1 Roll of Rabbitgoo Window Film
Size:
45x200cm(17.5''x78.7'')
60x200cm(23.6''x78.7'')
60x400cm(23.6''x157.5")
75x200cm(29.5''x78.7'')
75x300cm(29.5''x118.1")
75x400cm(29.5''x157.5")
90x200cm(35.4''x78.7'')
90x300cm(35.4''x118.1")
90x400cm(35.4''x157.5")
Installation Instructions:
1. Measure the surface and cut the privacy film. Leave an extra inch margin on each side for an easy adjustment.
2. Clean the target surface thoroughly and make sure the surface is clean enough without any dust.
3. Peel off the transparent backing film along a short side. (Very Important!!!)
4. Spray a lot of water or soapy water both on the smooth side of the window privacy film and the window, then install the window film onto the window.
5. Use the soft towel or squeegee to wipe the privacy film back and forth to make sure that the bubbles and water have been totally removed.
6. Trim off the margins and use a cloth to flatten out the film. Here you go!
How to Peel Off the Clear Backing Film:
Step 1 - Please wet one window film corner and use your fingers to twist it for a while to loosen the attachment between the window film and clear backing film;
Step 2 - Please attach a sticky tape to the side of the clear backing film corner (we have also attached a small sticky tape on each roll of window privacy film for your convenience), and then press it for effective attachment;
Step 3 - And then you are able to separate the clear backing film from the window film easily.
Some useful tips for you:
When applying in cold weather: before installation, blow hot air to the film using a hairdryer to soften the film up (Heat Resistant up to 176℉)
Affix a tape on a corner of the backside (the smooth side) to quickly remove the backing film.
- Rainbow Creator: rabbitgoo stained glass window cling features kaleidoscopic hues that transform into a stunning rainbow catcher, it creates a mesmerizing rainbow effect when sunlight through, adding fantastic aesthetics and stylish decor to your space
- Privacy Protection: Vibrant plaid pattern provides two-way privacy protection throughout the day and night, ensuring that your private space remains concealed and preventing curious onlookers from peeping inside
- UV & Heat Blocking: This rainbow window film effectively blocks UV rays, reduces glare while preserving natural light, protects your skin and furniture from direct sunlight, as well brings a certain degree of cooling
- Static Cling No Adhesive: Designed with easy-to-apply static cling, our film can be easily installed on glass surfaces in minutes using just water, without needing sticky or toxic glues. It is also removable and reusable
- Widely Used: Can be used for various rooms and settings, such as churches, restaurants, bedrooms etc. The lattice figure of the window cover allows you to freely cut it according to your own aesthetic and needs
Note:
1.The window film works only on flat, clean, and smooth surfaces. It will not stick on plastic, broken, or uneven surfaces.
2.Do not suggest installing the privacy window film on a double-pane window that will be exposed to the strong sunlight for a long time.
3.The decorative window film itself does not actually have any color. However, with special 3D laser design it will show a colorful visual effect when sunlight hits the privacy film after installation; You may put it in the sunlight, the more light it has, the more color it will have.
Package Included: 1 Roll of Rabbitgoo Window Film
Size:
45x200cm(17.5''x78.7'')
60x200cm(23.6''x78.7'')
60x400cm(23.6''x157.5")
75x200cm(29.5''x78.7'')
75x300cm(29.5''x118.1")
75x400cm(29.5''x157.5")
90x200cm(35.4''x78.7'')
90x300cm(35.4''x118.1")
90x400cm(35.4''x157.5")
Installation Instructions:
1. Measure the surface and cut the privacy film. Leave an extra inch margin on each side for an easy adjustment.
2. Clean the target surface thoroughly and make sure the surface is clean enough without any dust.
3. Peel off the transparent backing film along a short side. (Very Important!!!)
4. Spray a lot of water or soapy water both on the smooth side of the window privacy film and the window, then install the window film onto the window.
5. Use the soft towel or squeegee to wipe the privacy film back and forth to make sure that the bubbles and water have been totally removed.
6. Trim off the margins and use a cloth to flatten out the film. Here you go!
How to Peel Off the Clear Backing Film:
Step 1 - Please wet one window film corner and use your fingers to twist it for a while to loosen the attachment between the window film and clear backing film;
Step 2 - Please attach a sticky tape to the side of the clear backing film corner (we have also attached a small sticky tape on each roll of window privacy film for your convenience), and then press it for effective attachment;
Step 3 - And then you are able to separate the clear backing film from the window film easily.
Some useful tips for you:
When applying in cold weather: before installation, blow hot air to the film using a hairdryer to soften the film up (Heat Resistant up to 176℉)
Affix a tape on a corner of the backside (the smooth side) to quickly remove the backing film.