Product Overview
This 10-piece set of wheel arch moulding clip retainers is designed to secure the wheel arch trim in the specified applications. Each white nylon clip includes a sealer and uses a clip-on attachment design. These are aftermarket replacement parts and are not affiliated with or endorsed by any vehicle manufacturer.

Fitment

• For VW Atlas: 2021-2023
• For VW Atlas Cross Sport: 2020-2024
• For Audi Q3: 2019-2024
• Placement: Front, Rear, Left and Right

Product Features

• White nylon construction
• Includes a sealer
• Designed to retain wheel arch moulding
• Clip-on attachment
• Gloss finish
• Waterproof design
• Easy installation
• Vehicle-specific, non-universal fitment

Specifications

• Product Type: Wheel Arch Moulding Clip Retainer
• Reference Part Numbers: WHT008801, WHT008733, WHT-008-733, WHT-008-801
• Material: Nylon
• Color: White
• Top Head Size: 16 x 13 mm / approximately 0.63 x 0.51 in
• Bottom Head Diameter: 22 mm / approximately 0.87 in
• Stem Length: 13.2 mm / approximately 0.52 in
• Stem Diameter: 10.8 mm / approximately 0.43 in
• Quantity: 10
• Surface Finish: Gloss
• Attachment Type: Clip-On
• Country of Origin: China
• Manufacturer Warranty: 1 Year
• Universal Fitment: No
• Vintage Part: No
• Performance Part: No

Installation Guide

1. Compare the replacement clip with the existing clip and mounting location.
2. Carefully remove the old or damaged retainer from the wheel arch moulding.
3. Clean the mounting area and align the replacement clip with the mounting hole.
4. Press the clip into place until it is fully seated and the moulding is secure.
5. Check the installed trim for proper alignment and retention.

Installation Difficulty

• Difficulty: Easy
• Approximate Installation Time: Short installation; varies by vehicle and the number of clips replaced
• Tools: No special tools specified; a trim removal tool and clean cloth may be helpful

Package Includes

• 10 x Wheel Arch Moulding Clip Retainers with Sealers

Buyer Verification
Before ordering, compare the reference part number, clip shape, top and bottom head dimensions, stem dimensions, mounting hole, installation location and vehicle Make/Model/Year with the existing part.