INLINE SWITCH CABLE

DC Switch Lead

5.5 × 2.1mm  ·  300mm  ·  ON/OFF

SWITCH

I / O

CONNECTION DIAGRAM

DC MALE

INPUT

SWITCH

ON / OFF

300mm TOTAL LENGTH

DC FEMALE

OUTPUT

LENGTH

300mm

CONNECTOR

5.5×2.1

VOLTAGE

5–24V

SPECIFICATIONS

INPUT DC Male
OUTPUT DC Female
SWITCH TYPE Push Button
CONNECTOR SIZE 5.5 × 2.1 mm
VOLTAGE 5V / 12V / 24V
MATERIAL Plastic
COLOUR Black / White
ORIGIN Australia

COLOURS

BLACK

WHITE

TYPICAL USE

▸  LED strip lighting
▸  CCTV cameras
▸  12V and 24V DC devices
▸  Adding a manual switch to a DC line
▸  Low voltage DC projects

⚠ PLEASE READ BEFORE USE

  • The current rating is not stated by the supplier. Do not use this cable on a circuit that draws significant current. Check your device's draw before fitting.
  • Check polarity before connecting. DC barrel connectors are not always centre-positive. Connecting the wrong polarity can damage your device.
  • Switch off the power supply before connecting or disconnecting.
  • Low voltage DC only. Do not use on mains voltage circuits.
  • Indoor dry use. Do not use in wet or damp locations unless the cable is fully protected.
  • Do not exceed the voltage rating of the cable or the connected device.
  • This is not a mains-rated switch and is not suitable for high-current loads.
  • Keep out of reach of children. Check the cable for damage before each use.

📦 IN THE PACK

1 × Inline DC Switch Cable

Please check your connector size and colour before ordering. Colours may appear slightly different depending on your screen. Please allow a small measurement difference as lengths are taken by hand.