Description

• [EFFECTIVE BEARING］Under the premise that the shape of the object is regular and the contact surface is smooth, the effective bearing diameter of the turntable is 50cm/19.7in (because the maximum bearing value of the turntable is close to the central position of the base), and the object is relatively light, the effective bearing diameter can be appropriately extended. If the object is irregular in shape, the bearing load decreases.
• [NOISE AND SHAKE］When the turntable rotates, it will produce a noise of less than 50 dB, which is a normal phenomenon caused by motor rotation. If the weight of the object is too light or the speed of the turntable is the fastest or the slowest, it may cause the turntable to shake slightly, Adjust the speed to alleviate the shaking.
• [6M DISTANCE REMOTE CONTROL] You can remotely start or close the electric rotating display stand, adjusting the rotation speed and direction under 19.7 ft /6 m. The remote is best added bonus if your shooting a video.(Aim at the remote sensing lamp on the turntable)
• [360° ADJUSTABLE SPEED & DIRECTION] Moreover, this display turntable have continuous rotation mode and intermittent rotation mode, both modes supporting clockwise and counterclockwise. In continuous mode, it could adjust speed range from 40 to 120 sec/rev.
• [CAN TURN ONLY 1°] - You can make the motorized turntable turn 45°/90°/180°, to get just the right angle shot. Besides, it is amazing for doing the slightest angle adjustments, the lowest 1 degree setting is barely noticeable by eye but you could pick it up in camera. Great for fine-tuning of shooting products!

Please message me if you have any questions.