eBay

20K High Speed Digital Laser Scanner Galvanometer Galvo Laser 400-700nm

Specifications:
Laser stage performance Laser engraving
405- -468nm 20W MAX
450nm+- 20nm 20W MAX
420-470nm 20W MAX
1064+- 20nm 20W MAX

Note:

1、Before working, the drive plate and motor base must be fixed on a large metal plate, while paying attention to maintain good air convection for heat dissipation.
2、The scanning system is equipped with various connection cables at the factory, if the user uses other cables to connect by themselves, please pay attention to refer to the driver board wiring diagram. Motor serial number and scanning board serial number must be the same, X, Y drive board and motor corresponding respectively, otherwise it will produce pattern asymmetry, such as a circle into an ellipse.
3, scanning board factory has been adjusted, in addition to the IS potentiometer, the user shall not adjust other potentiometer, otherwise it may damage the mirror. According to the requirements of use, the pattern size can be adjusted with potentiometer IS, reverse rotation will increase the pattern, but can not be adjusted without limit, otherwise it may damage the lens. And to X plate and Y plate at the same time to adjust the symmetry, otherwise the hit pattern deformation, such as a circle into an ellipse.
4, please do not plug and unplug all kinds of connection cable with electricity, otherwise damage the lens.
5, pay attention to the protection of the lens. The lens is fragile, in the process of installation, take care not to collide with the lens, there can not be any material contact with the lens of the reflection The laser beam must not touch the reflective surface of the lens, otherwise it will stain or scratch the lens, affect the reflectivity of the lens or even burn the lens. When laser dimming, take care that the laser beam does not The laser beam should not hit the lens glue, as the glue absorbs heat and can easily cause the lens to burn off. When the lens is dirty, use medical cotton with acetone to lightly wipe.
7. When the machine is switched on and there is a strange noise or other abnormal phenomena, please switch off the machine immediately and start it again to avoid damaging the lens.

Package:

1x 20K High Speed Digital Laser Scanner Galvanometer Galvo Laser 400-700nm + Control Board +Power Supply

Payment Terms:

We only ship to confirmed address. Please make sure your shipping address is updated. If you want to change to another address,

please leave us a message immediately before it is mailed out. We will not take any responsibility for package missing because of the wrong address.

shipping mathod

We ship to USA by e-packet or other faster delivery shipping method, and we ship to rest of the word by Standard China Post Air Mail, to most of countries, it taks 10-15 business days to arrive if no shipping delay is incured. but to some countries in South America, Africa and East Aian countries, it can take longer time, as long as 40-60 days.
If you need items urgent, we can also ship by expedited shipping such as Fedex, DHL, UPS,Aramex and EMS. Russia just can use Express by EMS. and EMS is still very slow than other Express. we will choose Fedex or DHL for express shipping without special instruction from our customers. we have business corporation with these Express which they will provide a good severice.

Feedback & DSR

Please leave us positive feedback and 5-star DSR to us if you think the quality of our products and our service is well .

If you have any problems with the product, please keep free to contact us at first to solve it. we think communicate is a good way to solve any problem.

If you just don't like our products, please just send back to us for new replacement or full refund.we will try our best way to help you if it is our problem.so if you have any advice ,please let us know.we will do better!

We have always been trying to provide the best service and reliable products for every customer, however,

accident may happen sometimes, please contact us to deal with it at first time , thank you !