The Car Dent Repair Puller Kit is a versatile and essential tool for car owners looking to remove dents from their vehicles without the need for a visit to the garage. 
This kit includes 18pcs glue tabs and a T-Handle dent remover, making it easy to fix minor dents and scratches. 
The PDR and SMART repair features ensure a professional finish, while the unit type makes it convenient to use for DIY enthusiasts and professionals alike. 
This kit is a reliable solution for maintaining the appearance of your vehicle and preventing costly repairs.

How to use this paintless dent repair kits : 
1.Clean the dent with a clean wet cloth
2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the
drawing gasket is, the larger the drawing force is)
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue)
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen
8. Clean the repaired place with a clean wet cloth