Description

The Wago 750-341 is an Ethernet TCP/IP Fieldbus Coupler in the WAGO-I/O-SYSTEM 750 series. It connects a WAGO 750-series I/O node as a slave to an Ethernet fieldbus network and is compatible with any Ethernet TCP/IP master using Modbus/TCP or EtherNet/IP. Refer to manufacturer documentation to confirm compatibility with your specific application.

This coupler supports up to 64 I/O modules (expandable to 250 with the 750-628 Bus Extension Coupler) and auto-configures a local process image of up to 2 kbytes in and 2 kbytes out, handling digital, analog, and specialty module data. It connects via an RJ-45 port at 10/100 Mbit/s and is powered by 24V DC, drawing a maximum of 500 mA input current. Wiring is via WAGO CAGE CLAMP® terminals accepting conductors from 0.08 mm² to 2.5 mm² (AWG 28–14).

The coupler is configurable via PC and supports IP address assignment through BootP, DHCP, or EEPROM-stored settings. The maximum cable run between a hub and the 750-341 is 100 m, with overall network length governed by standard Ethernet specifications. This product has been noted as discontinued/obsolete by WAGO and authorized distributors.

Technical Specifications

  • Brand: Wago
  • MPN: 750-341
  • Type: Fieldbus Coupler
  • Series: WAGO-I/O-SYSTEM 750
  • Fieldbus Protocol: Ethernet TCP/IP
  • Supported Application Protocols: MODBUS/TCP (UDP), EtherNet/IP, HTTP, BootP, DHCP, DNS, SNTP, FTP, SNMP
  • Baud Rate: 10/100 Mbit/s
  • Fieldbus Connection: RJ-45
  • Max I/O Modules: 64 (250 with 750-628 bus extension)
  • Max Input Process Image: 2 kbytes
  • Max Output Process Image: 2 kbytes
  • Power Supply Voltage: 24V DC (-25% / +30%)
  • Max Input Current (24V): 500 mA
  • Internal Current Consumption (5V): 300 mA
  • Total Current for I/O Modules (5V): 1700 mA
  • Power Supply Efficiency: 87%
  • Current via Power Jumper Contacts (max): 10A DC
  • Isolation: 500V system/supply
  • Operating Temperature: 0 °C to +55 °C
  • Wire Connection: CAGE CLAMP®
  • Wire Cross Section: 0.08 mm² – 2.5 mm² / AWG 28–14
  • Strip Length: 8–9 mm / 0.33 in
  • Dimensions (W x H x L): 51 mm x 65 mm x 100 mm
  • Housing Material: Polycarbonate, Polyamide 6.6
  • Max Cable Run to Hub: 100 m
  • Configuration: Via PC
  • IP Address Assignment: BootP, DHCP, or EEPROM
  • RoHS Compliant: Yes
  • UL Listing: E198726
  • Country of Manufacture: Germany
  • Product Status: Discontinued



Condition: Used. This part was removed from a working production environment.



Shipping & Handling

Returns

We offer free returns through eBay's standard 30-day return policy. If something isn't right, message us first — we want to make it right and we'll work with you to do it.

About ACME MRO Solutions

We started ACME MRO Solutions to fix something we kept running into as contractors — plants down, parts slow, surplus listings you couldn't trust. Our goal is simple: get YOU the right component fast, with an honest description, so you can get back to running.

We describe what we see. Used items show signs of use; if a part has visible wear, damage, or a missing component, the condition description will say so. We don't claim anything is tested unless we tested it — and we don't bench-test parts where testing isn't practical or revealing (feed-through modules, breakers, mechanical components). When we do test something, we'll say so explicitly.

If something is our fault, we don't work through it — we make it right. We are proud to serve American manufacturing. Your uptime is our bottom line.

Save ACME MRO Solutions as a seller on eBay to get notified about new listings, store sales, and subscriber-only coupons.

Questions? Talk to us.

Send a message through eBay. During business hours we typically respond within the hour. Whether you need to confirm compatibility before buying, request additional photos, ask about a cross reference, or work through something after delivery — message first and we'll figure it out together.

Powered by SixBit
Powered by SixBit's eCommerce Solution