Thank you for visiting our store, here is a product description
SK11 high speed air ratchet wrench ARW-HS800.
Socket drive angle: 9.5 mm. Bolt capacity: 10 mm. Maximum torque: 40 Nm.
No-load speed: 100 rpm in low-speed mode and 800 rpm in high-speed mode.
Air consumption: 90 L/min in low-speed mode and 330 L/min at input air pressure 0.6 MPa in high-speed mode.
Overall length: approx. 190 mm. Weight: approx. 700 g. Body material: iron and resin. Air connection port: tapered female pipe thread Rc1/4.
Included accessories: 1 air plug R1/4 and 1 air tool oil.
Color: Red.
Product type: Air ratchet wrench.
Ideal for removing and fastening many bolts and nuts in automotive maintenance and dismantling work.
Applications: tightening and loosening bolts and nuts.
Features:
- Rotation speed switching function: low speed 100 rpm / high speed 800 rpm
- Forward and reverse rotation direction switching function
- Maximum tightening capacity: 40 N/m
- Easy-to-grip, non-slip resin body that does not get cold easily
- Swivel air connection port reduces hose twisting
- Rear exhaust helps reduce concern about exhaust air and oil spray
- Speed can be adjusted by the throttle lever grip
Cautions:
- To achieve full performance, use a hose with an inner diameter of at least 6.5 mm and an air compressor with air discharge capacity of 100 L/min or more.
- Before, during, and after use, always apply a few drops of oil through the air inlet of the main body.
- The oil helps prevent rust on the internal metal parts from moisture entering the body together with air from the compressor or piping.
- It also helps discharge foreign matter and resin or metal powder sludge generated inside the body during use.
- Use commercially available air tool oil, pneumatic tool oil, or oil equivalent to turbine oil ISO VG32.