MRC MATRIX RACING CLUB For Tamiya BT-01/MB-01 FR Drift Conversion Kit Full Set

Compatible with the Tamiya BT-01 and MB-01 (FR configuration) chassis. Some modification is required for installation.

This conversion kit increases the steering angle of the front wheels on the BT-01 and MB-01 FR configuration, making 2WD drifting possible.

Two instruction manuals are included: one for the BT-01 and one for the MB-01. Please refer to the manual corresponding to your chassis.

The chassis and electronics are not included and must be prepared separately.

In addition to the chassis and electronics, a gyro and drift-specific wheels and tires are required for 2WD drifting. When using the wheel hubs included in this kit, 8mm offset wheels are recommended.

< Additional BT-01 Parts Required to Convert an MB-01 to FR Configuration >

• SP-1732 BT-01 C Parts (Wheel Axles)

• SP-1734 BT-01 F/L Parts (Mechanical Mount & Rear Body Mount Base)

• SP-1733 BT-01 E Parts (Subframe)

• SP-1737 BT-01 FR Spur Gear Shaft Set

These parts are required when converting an MB-01 chassis to the FR configuration.