In Phase IPA 7001D bench tested after and in fully working order, there is a large slot in the side shown in picture for led’s if you wish to light it up as I did


Power source 14.4V DC (10V to 16V)
Grounding system Negative type
Current consumption 85A (at continuous power : 4Ω)
155A (at continuous power : 2Ω)
316A (at continuous power : 1Ω)
Average current consumption 1.8A (4Ω for one channel
2.0A (2Ω for one channel.)
2.3A (1Ω for one channel.)
Fuse N/A
Dimensions (W x H x D )250mm x 55.5mm x 580mm
Weight 6.2kg (13.7bs excluding cables)
Maximum power output 2000W x 1 (4Ω)
3800W x 1 (2Ω)
7000W x 1 (1Ω)
Continuous power output 1000W x 1 (at 14.4V. 4Ω 20Hz to 240Hz.<1% THD)
1900W x 4 (at 14.4V. 2Ω 20Hz to 240Hz.<1% THD)
3500W x 2 (at 14.4V. 1Ω 20Hz to 240Hz.<1% THD)
Load impedance 4Ω (1Ω to 8Ω allowable)
Frequency response 10Hz to 250Hz (+0dB.-3dB
Signal noise ratio 100dB (IHF-A network)
Low pass filter: cut off frequency50Hz to 250Hz
cut off slope-24dB/oct
High pass filter cut off frequency 10Hz to 50Hz
cut off slope-24dB/oct
Bass control: Frequency 50Hz
Level 0dB to 12d
Gain control 200mV to 6V
Maximum input level / impedance6V / 22kΩ
Power output 1000W RMS x 1 Channel (at 14.4V 4Ω 20Hz to 240Hz and <1% THD+N)
1900W RMS x 1 Channel (at 14.4V 2Ω 20Hz to 240Hz and <1% THD+N)
3500W RMS x 1 Channel (at 14.4V 1Ω 20Hz to 240Hz and <1% THD+N)S/N ratio75dBA (refrence : 1W into 4Ω)