10Pcs PTFE Flat Washers 12x19x2mm Sealing Spacer Flange Gasket White
Sealing gaskets are very suitable for sealing corrosive fluids, gases and extreme temperature environments, such as chemical processing plants, oil and gas industries, sealing pipes, valves and accessories, home sewing machine, electronic components and assemblies.
Specification
Color: White
Material: PTFE (Polytetrafluoroethylene)
Draw Ratio: 193%
Density: 2.15 g/cm³
Shore Hardness: 55 Shore D
Dynamic Friction Factor: 0.06
Dielectric Strength: 15 kV/mm
Tensile Strength: 19.5 Mpa
Compressive Strength: 10 Mpa
Working Temperature: -100°C to 250°C (-148°F to 482°F)
Size: 12 x 19 x 2 mm / 0.47 x 0.75 x 0.08 inch (ID*OD*Thickness)
Item Includes: 10 x Sealing Spacers
Advantage
1. Flat sealing gaskets are made of PTFE (Polytetrafluoroethylene), which has chemical resistance, high temperature resistance, low friction, anti-stickiness, corrosion resistance, corrosion resistance, and non-conductive properties, making them very suitable for sealing corrosive fluids, gases and extreme temperature environments.
2. PTFE washers show good sealing capabilities to various oil, water, air, effectively resisting the penetration of liquids or gases, and can also be used for cushioning, reducing pressure and friction, increasing the contact area and providing a support surface for fasteners.
Instruction
Before installing the gasket, make sure the surface is clean and dry, place the seal gasket on the intended area that needs sealing or cushioning, and tighten the fasteners firmly to compress the gasket to achieve a tight seal or effective cushioning
NOTE: Please confirm the washer diameter before ordering, and pay attention to regular inspection and maintenance of sealing gaskets
Specification
Color: White
Material: PTFE (Polytetrafluoroethylene)
Draw Ratio: 193%
Density: 2.15 g/cm³
Shore Hardness: 55 Shore D
Dynamic Friction Factor: 0.06
Dielectric Strength: 15 kV/mm
Tensile Strength: 19.5 Mpa
Compressive Strength: 10 Mpa
Working Temperature: -100°C to 250°C (-148°F to 482°F)
Size: 12 x 19 x 2 mm / 0.47 x 0.75 x 0.08 inch (ID*OD*Thickness)
Item Includes: 10 x Sealing Spacers
Advantage
1. Flat sealing gaskets are made of PTFE (Polytetrafluoroethylene), which has chemical resistance, high temperature resistance, low friction, anti-stickiness, corrosion resistance, corrosion resistance, and non-conductive properties, making them very suitable for sealing corrosive fluids, gases and extreme temperature environments.
2. PTFE washers show good sealing capabilities to various oil, water, air, effectively resisting the penetration of liquids or gases, and can also be used for cushioning, reducing pressure and friction, increasing the contact area and providing a support surface for fasteners.
Instruction
Before installing the gasket, make sure the surface is clean and dry, place the seal gasket on the intended area that needs sealing or cushioning, and tighten the fasteners firmly to compress the gasket to achieve a tight seal or effective cushioning
NOTE: Please confirm the washer diameter before ordering, and pay attention to regular inspection and maintenance of sealing gaskets
Hot Item
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
10Pcs PTFE Flat Washers 12x19x2mm Sealing Spacer Flange Gasket White
Sealing gaskets are very suitable for sealing corrosive fluids, gases and extreme temperature environments, such as chemical processing plants, oil and gas industries, sealing pipes, valves and accessories, home sewing machine, electronic components and assemblies.
Specification
Color: White
Material: PTFE (Polytetrafluoroethylene)
Draw Ratio: 193%
Density: 2.15 g/cm³
Shore Hardness: 55 Shore D
Dynamic Friction Factor: 0.06
Dielectric Strength: 15 kV/mm
Tensile Strength: 19.5 Mpa
Compressive Strength: 10 Mpa
Working Temperature: -100°C to 250°C (-148°F to 482°F)
Size: 12 x 19 x 2 mm / 0.47 x 0.75 x 0.08 inch (ID*OD*Thickness)
Item Includes: 10 x Sealing Spacers
Advantage
1. Flat sealing gaskets are made of PTFE (Polytetrafluoroethylene), which has chemical resistance, high temperature resistance, low friction, anti-stickiness, corrosion resistance, corrosion resistance, and non-conductive properties, making them very suitable for sealing corrosive fluids, gases and extreme temperature environments.
2. PTFE washers show good sealing capabilities to various oil, water, air, effectively resisting the penetration of liquids or gases, and can also be used for cushioning, reducing pressure and friction, increasing the contact area and providing a support surface for fasteners.
Instruction
Before installing the gasket, make sure the surface is clean and dry, place the seal gasket on the intended area that needs sealing or cushioning, and tighten the fasteners firmly to compress the gasket to achieve a tight seal or effective cushioning
NOTE: Please confirm the washer diameter before ordering, and pay attention to regular inspection and maintenance of sealing gaskets
Specification
Color: White
Material: PTFE (Polytetrafluoroethylene)
Draw Ratio: 193%
Density: 2.15 g/cm³
Shore Hardness: 55 Shore D
Dynamic Friction Factor: 0.06
Dielectric Strength: 15 kV/mm
Tensile Strength: 19.5 Mpa
Compressive Strength: 10 Mpa
Working Temperature: -100°C to 250°C (-148°F to 482°F)
Size: 12 x 19 x 2 mm / 0.47 x 0.75 x 0.08 inch (ID*OD*Thickness)
Item Includes: 10 x Sealing Spacers
Advantage
1. Flat sealing gaskets are made of PTFE (Polytetrafluoroethylene), which has chemical resistance, high temperature resistance, low friction, anti-stickiness, corrosion resistance, corrosion resistance, and non-conductive properties, making them very suitable for sealing corrosive fluids, gases and extreme temperature environments.
2. PTFE washers show good sealing capabilities to various oil, water, air, effectively resisting the penetration of liquids or gases, and can also be used for cushioning, reducing pressure and friction, increasing the contact area and providing a support surface for fasteners.
Instruction
Before installing the gasket, make sure the surface is clean and dry, place the seal gasket on the intended area that needs sealing or cushioning, and tighten the fasteners firmly to compress the gasket to achieve a tight seal or effective cushioning
NOTE: Please confirm the washer diameter before ordering, and pay attention to regular inspection and maintenance of sealing gaskets
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.