Vehicle Fitment

• Universal — fits vehicles with 5x114.3 (5x4.5) bolt pattern, 72.6mm hub bore, and adequate brake/suspension clearance for 18x9.5 +22mm offset

Fitment Notes

• This is a universal aftermarket wheel — buyer is responsible for confirming hub bore, offset, and clearance compatibility with their specific vehicle and suspension setup
• Bolt pattern: 5x114.3 (5x4.5) only — does not fit 5x100, 5x112, 5x120, or any other bolt pattern
• Hub bore is 72.6mm; hub centric rings may be required for vehicles with a smaller or larger factory bore
• +22mm offset provides a moderately aggressive outboard stance suitable for a wide range of 5x114.3 JDM and domestic performance platforms
• Big brake clearance is specifically engineered to accommodate larger calipers including the R32 Nissan GT-R brake caliper
• Lug nut seat style: 60-degree conical (tuner-style) — aftermarket conical seat lug nuts are required; OEM mag-washer or ball-seat lug nuts are not compatible
• Valve stems are not included
• TPMS compatible — existing sensors may transfer with proper installation

Features

• Bold 6-spoke soft-edge design inspired by legendary 1990s Japanese performance wheels — Kansei's modern homage to the iconic "Godzilla" wheel aesthetic in Gloss Gunmetal Gray
• Genuine concave face profile delivering authentic dimensional depth and an aggressive appearance unique to the Tandem design language
• Gloss Gunmetal Gray finish delivers a dark, refined metallic look with strong visual contrast across the concave spokes — complementing a wide range of JDM, Euro, and domestic build styles
• FORMLITE flow-formed construction using A356-T6 aluminum — stronger and lighter than standard low-pressure cast wheels
• Deep mounting pad pocketing between lug holes for maximum unsprung weight reduction
• Reinforced inner rim lip for added structural durability and impact resistance on road and track
• Maximum in-class big brake clearance — including specific fitment clearance for the R32 Nissan GT-R caliper and similarly large aftermarket braking systems
• TPMS compatible design for seamless factory or aftermarket sensor integration
• Low-profile gel center cap included for a clean, finished appearance
• DOT-approved for full street legality; U.S. Patent #D954627
• Kansei Limited Lifetime Structural Warranty and 1-Year Finish Warranty included

Specifications

• Wheel Diameter: 18 inches
• Wheel Width: 9.5 inches
• Offset: +22mm
• Backspacing: 6.12 inches
• Hub Bore: 72.6mm
• Bolt Pattern: 5x114.3 (5x4.5)
• Load Rating: 1,550 lbs. per wheel
• Weight: 29.00 lbs. per wheel
• Wheel Material: A356-T6 aluminum alloy (FORMLITE flow-formed)
• Wheel Structure: One-piece monoblock
• Spoke Count: 6
• Lug Seat Style: 60-degree conical (tuner-style)
• Finish: Gloss Gunmetal Gray
• True Directional: No
• U.S. Patent: #D954627

Included Components

• 1x Kansei Tandem K11G 18x9.5 5x114.3 +22mm Gloss Gunmetal Gray Wheel
• 1x Low-Profile Gel Center Cap

Product Description

The Kansei Tandem K11G-189512+22 is an 18x9.5 flow-formed alloy wheel finished in Gloss Gunmetal Gray — a versatile and widely used configuration in the Tandem lineup, offering genuine concave depth at a size and offset that delivers broad platform compatibility without the extreme fitment demands of wider or lower-offset variants. Built on Kansei's FORMLITE platform using A356-T6 aluminum, it weighs in at 29.00 lbs. per corner with a 1,550 lb. load rating — a meaningful strength-to-weight advantage over conventional cast wheels of comparable size. The +22mm offset positions the 9.5-inch face with a moderately aggressive outboard stance that works cleanly across most 5x114.3 builds at stock or mildly modified ride heights.

The Tandem's six softly-edged spokes fan outward from a genuinely concave center — a profile inspired by Kansei's tribute to the iconic 1990s Japanese performance wheels of the Godzilla era. The Gloss Gunmetal Gray finish reads as a deep, refined metallic that enhances the spoke-to-shadow contrast across the concave face, giving the wheel a purposeful, aggressive look that pairs naturally with a wide range of vehicle colors. FORMLITE barrel construction and deep mounting pad pocketing between lug holes reduce rotational mass, while a reinforced inner rim lip adds resilience for both daily use and occasional track sessions. Big brake clearance is specifically engineered for the R32 Nissan GT-R caliper, ensuring compatibility with serious aftermarket brake upgrades — including Brembo and comparable systems — without wheel spacers. TPMS compatibility keeps modern daily drivers fully monitored and road-legal.

The 5x114.3 bolt pattern and 72.6mm hub bore make the Tandem K11G-189512+22 a natural fitment for JDM and domestic performance platforms including the Nissan 240SX (S13/S14), Nissan 370Z, Infiniti Q50, G35, and G37; Honda Civic Type R, S2000, and Accord; Acura Integra, TLX, and RSX; Mazda MX-5 Miata, RX-8, and Mazda6; Subaru BRZ and WRX STI; Toyota GR86 and Supra; Lexus IS, GS, and RC; Hyundai Elantra N and Veloster N; Kia Stinger; Ford Mustang; Dodge Challenger and Charger; and many others. Hub centric rings may be needed depending on the specific vehicle's factory bore size. Aftermarket 60-degree conical lug nuts are required — OEM lug nuts and valve stems are not included. Always confirm brake clearance, hub bore, and offset suitability for your specific vehicle before ordering.