Vehicle Fitment

• 2013–2017 Subaru BRZ (Base, Limited, Series.Blue, Series.Yellow, RWD)
• 2013–2016 Scion FR-S (Base, RWD)

Fitment Notes

• Bolt pattern is 5x100 — single drill only. Confirm your vehicle uses the 5x100 bolt pattern before ordering.
• Hub bore is 72.6mm — hub-centric rings may be required depending on your vehicle's factory hub bore diameter. Verify before installation; rings are not included.
• Offset is +45mm (backspacing: 6.27 in). The +45mm offset in 9-inch width provides an assertive, wider-track stance on the BRZ and FR-S that fills the wheel wells more aggressively than the OEM sizing without exceeding fender clearance on stock suspension. Verify clearance with your suspension setup and tire sizing before installing.
• The 2017–2020 Toyota 86, 2018–2020 Subaru BRZ, and 2022–2025 BRZ / GR86 are not confirmed for this SKU per the authorized dealer fitment list — buyers with those model years should verify independently before purchasing.
• This is the Storm Gray finish variant. The same TS-10 17x9 / 5x100 / +45mm is also available in Gloss Black (499-790-8045BK) and limited Gold.
• The TS-10 includes Enkei's signature flat center cap as standard — distinct from the dome-style center caps used on other Enkei models.
• This wheel is sold individually; a set of four (4) is required for complete vehicle fitment.
• A flat center cap is included with purchase. Valve stems are not included and must be sourced separately.

Features

• The TS-10's design philosophy takes the simplest possible approach to achieving Enkei's lightweight-and-strong objective: ten cleanly cut spokes reach all the way to the very edge of the wheel face, creating the visual impression that the wheel is larger than its actual diameter while eliminating unnecessary material between the spokes entirely.
• Available in concave and flat face profiles depending on size and width — the 17x9 configuration uses a more pronounced concave profile than narrower 17x8 variants, giving the 9-inch width deeper dimensional presence when viewed from outside the vehicle.
• Built using Enkei's MAT (Most Advanced Technology) flow-forming process, combining a cast aluminum center with a rim-spinning operation that pressure-densifies the barrel section, producing a wheel that is significantly lighter than conventional casting of equivalent dimensions at equal or greater structural strength.
• Confirmed weight of 19.15 lbs per wheel for the 17x9 size — particularly notable in the context of the BRZ and FR-S platforms, where reducing unsprung rotational mass produces an outsized improvement in handling response relative to the small absolute weight savings.
• The 17x9 / +45mm configuration is designed to fit within the BRZ and FR-S's wheel wells without fender modifications at stock ride height, delivering a wider stance and access to 255-section tires for improved rear grip in performance driving applications.
• Enkei's signature flat center cap is standard equipment on every TS-10 — a low-profile, flush-fitting cap that completes the clean 10-spoke aesthetic without the visual interruption of a protruding dome cap.
• Storm Gray finish is a muted, warm grey tone — distinct from the cooler Platinum Gray on the TS9 — that pairs naturally with the BRZ and FR-S color palette, particularly the Hyper Blue, Crystal Black Silica, and Magnesium Gray Metallic common to those platforms.
• Engineered and tested to Enkei's proprietary Spec-E standard, which exceeds JWL requirements by demanding a higher drop point in the impact test and 20% more cycles in both rotary bending fatigue and dynamic radial fatigue testing.
• Backed by Enkei's Lifetime Structural Warranty and 1-Year Finish Warranty through authorized dealers.

Specifications

• Part Number: 499-790-8045GR
• Wheel Model: TS-10
• Series: Tuning Series
• Wheel Diameter: 17 inches
• Wheel Width: 9 inches
• Bolt Pattern: 5x100
• Offset: +45mm
• Backspacing: 6.27 inches
• Hub Bore: 72.6mm
• Load Rating: 1,540 lbs per wheel
• Weight: 19.15 lbs per wheel
• Finish: Storm Gray
• Wheel Structure: One Piece
• Construction: MAT Flow-Forming (Rotary Forged)
• Testing Standard: Enkei Spec-E (exceeds JWL)
• Spoke Count: 10
• Spoke Style: Clean 10-spoke, edge-to-edge, concave face profile
• Center Cap Style: Flat (Enkei signature flat cap)
• Lug Style: Exposed

Included Components

• 1x Enkei TS-10 17x9 Storm Gray Wheel (499-790-8045GR)
• 1x Flat center cap (Enkei signature TS-10 flat-style cap)
• Note: Lug nuts, hub-centric rings, and valve stems are not included and must be sourced separately.

Product Description

The Enkei TS-10 (499-790-8045GR) is a 17x9 Tuning Series wheel in Storm Gray, drilled for the 5x100 bolt pattern at +45mm offset — confirmed by OAKOS for the 2013–2017 Subaru BRZ and 2013–2016 Scion FR-S. In the 5x100 / 9-inch width / +45mm configuration, the TS-10 is one of the more precisely targeted aftermarket wheel options for these platforms, fitting within the stock fender clearance at standard ride height while delivering the 9-inch contact patch width needed to run 255-section tires for improved rear grip on track and in spirited driving.

The TS-10's design is the most minimal approach to wheel aesthetics in Enkei's Tuning Series lineup: ten cleanly cut spokes reach all the way to the outer rim edge with no decorative treatment, filler material, or visual complexity at the perimeter. The 17x9 version uses a concave face profile that gives the wheel additional depth when viewed from outside the car — a detail that becomes more pronounced as the width increases. Enkei's signature flat center cap sits flush with the wheel face, maintaining the visual discipline of the overall design. At 19.15 lbs per wheel, the TS-10 17x9 delivers meaningful unsprung mass savings on the BRZ and FR-S — platforms where every unsprung pound has a disproportionate effect on handling feel and responsiveness.

Confirmed fitment covers the 2013–2017 BRZ and 2013–2016 FR-S per OAKOS's authorized dealer data. The 2017–2020 Toyota 86, 2018–2020 BRZ, and 2022+ BRZ / GR86 are not confirmed for this SKU — verify independently before purchasing for those model years. This wheel is sold individually; a set of four is required. A flat center cap is included — valve stems, lug nuts, and hub-centric rings must be sourced separately. For the Gloss Black version, see 499-790-8045BK.