Glued to MusicThe Source Audio Ventris Dual Reverb Pedal contains two powerful processors allowing two independent reverb effects to be run at the same time and features 12 on board reverb effects, stereo ins & outs, MIDI In and Thru jacks, 4 or 8 on board presets and 128 MIDI accessible presets.
The Ventris contains two completely independent reverb processors, essentially housing a matching pair of high powered reverb pedals in a single box, the dual reverbs can be run on their own (A or B) or together in parallel (A+B) or cascading (A feeding in to B) or even split with one effect going to each of the stereo outputs (independent stereo paths and other advanced signal paths set up in the editor/app). When using single reverbs having two processors allows seamless 'spillover' from one preset to the next without abruptly cutting off the trails of the previous effect (decay time adjustable via the app). The powerful processors also allowed Source Audio to perfect the complex nature of a spring reverb under their 'True Spring' engine for a supremely natural sounding effect. Tapping the Option footswitch sets time based parameters (modulation rate, tremolo rate, pre-delay time etc.) and holding it gives infinite reverb in most modes. The tone of the reverb can be easily sculpted with the time, pre-delay, mix and treble knobs and through the control 1 and 2 knobs, the control knobs adjust different parameters based on the preset selected (spring length, bass, modulation depth etc.). Your settings can be saved as one of 4 on board presets by default or up to 8 by using the preset extension mode (turned on via the app), each preset is easily recalled via the footswitch scrolling function or you can cycle through them using the preset select/save button.
A full breakdown of the 12 reverb types is as follows:
The pedal has stereo input and output jacks and MIDI in and thru jacks, MIDI messages can be used to engage/disengage the pedal, recall up to 128 presets, move parameters and more. The 3.5 mm 'control input' port allows connection to external control devices such as the Source Audio Tap Tempo Switch, Source Audio Dual Expression Pedal, Neuro Hub and Hot Hand Motion Controller and a 1/4" 'pedal in' jack also allows the use of an expression pedal or footswitch. The tap tempo or other single/dual footswitch can be used to scroll through presets or input a time based tap function and expression pedals can be set up to control up to three different parameter knobs (and the mapping can be stored as part of a preset). Additional reverb effects, advanced options and editing and access to a library of ready to use presets is provided by the free Source Audio Neuro app and desktop editor, you can connect the Ventris pedal to a Windows PC or Mac via the USB port and connect it to the headphone jack of your phone using the included 1/4" to 1/8" TRS cable, the firmware can also be updated via the USB port. The deep dive editing functions and dual processor capabilities make the Source Audio Ventris Reverb a powerful pedal and the numerous on board features and simple controls give it out of the box usability, all wrapped up in a compact and rugged enclosure.
| Width | 114 mm (4.5") |
| Length | 114 mm (4.5") |
| Height (excluding knobs) | 37 mm (1.5") |
| Height (including knobs) | 56 mm (2.2") |
| Power Draw | 280mA |
| Manufacturer Part Number | SA262 |
| UPC-A | 890729001538 |
If you order more than one item from us we’ll ship all the items together in the most cost effective way and refund you the difference.