Product Overview
This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor, a hard alloy grinding head, a power switch and an indicator light. Special carbide grinding head, greatly improve the efficiency and service life; With the design of dust outlet and dust plate, gypsum debris will not splash, easy to use, is an ideal processing tool!
Product Parameters
| Voltage: | AC110V |
| Power: | 180W |
| Motor rotational speed: | 2800 RPM |
| Package size: | 11"*9.5"*10" (28CM*24CM*26CM) |
| Net/gross weight: | 16LB(7.3KG) / 16.5LB(7.5KG) |
Product Features & Advantages
Dustproof Plate
The design of dustproof plate on the top of the machine, the use of transparent baffle, can be clearly observed when working; Prevent dust from splashing and ensure a clean working environment.
Grinding Head
The use of special carbide grinding head, the use of high-quality materials, improve the grinding efficiency, longer service life, good grinding effect.
Dust Outlet
Through the dust outlet, the gypsum debris inside the machine can be discharged to ensure internal cleanliness and better prevent the splashing of gypsum debris.
Note: The dust outlet should be used with a vacuum cleaner. Clean the remaining plaster debris inside the machine after each use. In particular, keep the motor shaft clean. Minimize the resistance of motor rotation.
Foot Pad
There are four non-slip foot pads at the bottom of the machine, which ensure the stability of the machine during work, prevent sliding, reduce vibration and reduce noise, and make it safer to use.
Heat Dissipation
The design of a heat dissipation hole at the bottom of the machine can dissipate the heat generated by the motor in time, reduce the internal temperature and extend the service time.
Instructions & Cautions
A. Instructions
- Unpack the carton case, check if all the accessories are complete.
- The electric outlet must have a good grounding.
- After connecting to the power supply, the indicator light on the lower left corner of the machine should be on.
- Turn on the power switch, the motor(grinding head) should start working and the red indicator light in the power switch is on.
- While grinding, push with both hands with gentle and evenly, do not touch the grinding head.
- Users can connect the dust outlet with a pipe into a dust box, connecting with a suction box is preferable.
- Clean the dust in the dust chamber regularly.
B. Cautions
- There might be two possibilities if the motor does not work:
- If the green indicator light is not on, check if the power supply is connected and whether the fuse tube in the electric outlet is burned out.
- If the green indicator light and the power indicator are on, check if there is open circuit in the motor, capacitor and circuit.
- If the shaking is severe, it could be caused by the loosening of the nut on the clip. To resolve the problem, lift the cover and tighten the loose nut.
Item Included(056994)
| Plaster model arch trimmer *1 | Power cord *1 |
You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Shipping & Handling Details
Return / Refund
Payment
Warranty & Feedback
On Nov 18, 2025 at 18:25:33 PST, seller added the following information: