Welcome

CNC Motorcycle 7/8" Clip-On Handlebars 33mm Fork Tube For Cafe Racer Universal
  Product Description

The CNC machined Clip-On Handlebars are an economical replacement handlebar with amazing strength. They are machined from solid billet with a removable handlebar. In the event of a crash, you simply replace the handlebar tube instead of the entire Clip-on. Handlebars sit at a 7 degree angle giving racers and street riders the ultimate handlebar position. Lightweight, great looks, improved strength, adjustability and easy installation.

Item Specifications:
-- Condition: 100% Brand New
-- Quantity: 1 Set (Left & Right)
-- Bar Length: 29.5cm 
-- Bar Size: 22.2 mm/Aprx 7/8 inch
-- Clip Ons Diameter: 33mm
-- Riser Clip-ons are 1" Raised
-- Color: Black

Features:
-- Economical Replacement Handlebar With Amazing Strength
-- CNC Machined From T6061-T6 Billet Aluminum
-- Hard Anodised Finishing For Increased Longevity
-- Ergonomic Design Minimizes Fatigue And Discomfort By Creating The Optimal Riding Position
-- Stainless Steel Fasteners and Delrin Plastic Ends Add The Finishing Touches
-- Removable Handlebar & Adjustable Motion Fore and Aft
-- Easy to Install, No Installation Instruction


Note:
clip-on handlebars are primarily designed for race use and may not fit to a standard bike without other modifications

Installation Note
1. These clip ons are not OEM replacement parts. clip ons are for
race use only.
2. Remove old clip ons and clean mounting areas free of grime, dirt, etc.
3. Install both collars and snug screws.
4. Install handlebar tubes and adjust both bodies to desired angle. Ensure
that bars are in a position that will not interfere with turning.
5. Tighten bodies to fork legs.
6. Adjust handlebar tubes to desired length and tighten.
7. Turn steering from lock to lock and be sure there are no obstructions when doing so.
8. You may need to drill small hole(s) in the throttle and/or clutch side handlebar tube(s) for the control switch housing.
9. Install controls and check again to make sure there are no obstructions when turning from lock to lock.
10. When all steps are complete, you’re ready to ride. Always check bolts before riding to ensure they are tight.


Remarks: All the products were taken in-kind, due to camera, light, display parameters and other factors, there may have color aberration. If you would like to clarify the color tone, please kindly contact us for details.

Fitment:
Universal Fits Most 33mm Fork Tubes
DISCLAIMER
Disclaimer: Digital2Brother parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Harley-Davidson, Honda, Yamaha, Kawasaki, Suzuki, KTM, Duke, Husaberg, Husqvarna, BMW, Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco etc.

Payment Policy

  • For your safety and convenience,we process all payments through PayPal where all major Credit Cards are accepted (Amex, Visa, MasterCard, Discover, etc.).
  • Import duties, taxes and charges are NOT included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office before buying.
  • Payment must be made within 7 days after you win the auction. Non-Paying bidders will be reported.

Shipping Policy

  • We do our best to ship it out within 1 business of receiving your order and provide tracking numbers on all orders.
  • Please note that we can only ship to addresses verified with PayPal or your credit card.
  • Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
  • Delivery time might be longer if the item(s) be inspected by customs

Return & Refund

  • All our products come with a 30-Day Return Policy. If you would like to return your item and you are within 30 days of the purchase, and it is still in its original condition, you can return the item by contacting us through eBay messaging.
  • If you are not 100% satisfied, please let us know the Detailed Problem,We will give you a 100% satisfactory solution
  • If you received an incorrect, damaged, defective, or item not as described, contact us for a partial/full refund or replacement on our cost.
  • Buyer should pay for the return shipping fee if All NON-Seller Mistake returns for refund . (E.g. you brought wrong size or wrong item).

Feedback

  • We hope to give you a positive eBay experience by working hard, and we expect to receive a positive feedback and Detailed Selling Rating (DSR) of 5 Rating in ALL of the feedback categories (Item as described, Communication, Shipping Time and Shipping and handling charges) from the buyer upon receiving the item .
  • If you are not satisfied with our items or service, please don't hesitate to contact us before you leave any Neutral/Negative feedbacks, we will always try our best for 100% customer satisfaction.
  • Communication is the best way to solve problem. leaving a negative feedback will not help us solve any problems.

About Item

  • All items sold by us are being described to the best of our abilities, as accurate as possible, and with utmost conscientiousness on our part.
  • However, to avoid any potential oversights, I respectfully request your assistance in helping us to make this a mutually satisfactory transaction by THOROUGHLY reviewing item description and photos, and asking all questions PRIOR TO BIDDING.

Customer Satisfaction

  • Do not hesitate to contact us anytime before and after your purchase, we are committed to your 100% customer satisfaction.
  • We back our commitment with superb service, 100% full money back and a customer satisfaction guarantee.
  • Our goal is to make sure you are a happy customer and pleasant shopping with us.

Visit Our Store For Best Deal! Digital2Brother Store
The CNC machined Clip-On Handlebars are an economical replacement handlebar with amazing strength. They are machined from solid billet with a removable handlebar. In the event of a crash, you simply replace the handlebar tube instead of the entire Clip-on. Handlebars sit at a 7 degree angle giving racers and street riders the ultimate handlebar position. Lightweight, great looks, improved strength, adjustability and easy installation.

Item Specifications:
-- Condition: 100% Brand New
-- Quantity: 1 Set (Left & Right)
-- Bar Length: 29.5cm 
-- Bar Size: 22.2 mm/Aprx 7/8 inch
-- Clip Ons Diameter: 33mm
-- Riser Clip-ons are 1" Raised
-- Color: Black

Features:
-- Economical Replacement Handlebar With Amazing Strength
-- CNC Machined From T6061-T6 Billet Aluminum
-- Hard Anodised Finishing For Increased Longevity
-- Ergonomic Design Minimizes Fatigue And Discomfort By Creating The Optimal Riding Position
-- Stainless Steel Fasteners and Delrin Plastic Ends Add The Finishing Touches
-- Removable Handlebar & Adjustable Motion Fore and Aft
-- Easy to Install, No Installation Instruction


Note:
clip-on handlebars are primarily designed for race use and may not fit to a standard bike without other modifications

Installation Note
1. These clip ons are not OEM replacement parts. clip ons are for
race use only.
2. Remove old clip ons and clean mounting areas free of grime, dirt, etc.
3. Install both collars and snug screws.
4. Install handlebar tubes and adjust both bodies to desired angle. Ensure
that bars are in a position that will not interfere with turning.
5. Tighten bodies to fork legs.
6. Adjust handlebar tubes to desired length and tighten.
7. Turn steering from lock to lock and be sure there are no obstructions when doing so.
8. You may need to drill small hole(s) in the throttle and/or clutch side handlebar tube(s) for the control switch housing.
9. Install controls and check again to make sure there are no obstructions when turning from lock to lock.
10. When all steps are complete, you’re ready to ride. Always check bolts before riding to ensure they are tight.


Remarks: All the products were taken in-kind, due to camera, light, display parameters and other factors, there may have color aberration. If you would like to clarify the color tone, please kindly contact us for details.

Fitment:
Universal Fits Most 33mm Fork Tubes
ibay365

On Oct 24, 2025 at 18:04:40 PDT, seller added the following information:

Datacaciques