--Solar panel: 5V 1.2W Monocrystalline silicon

--Battery: Lithium Iron 3.7V / 1800mAh

--LED lamp beads: SMD3535*13pcs

--Emitting color: Monochrome/Colorful RGB

--Waterproof Grade: IP68 Protection Grade

--Material: ABS+PC

--Charging time: 4-5 hours under direct sunlight

--Working time: 6-8 hours after full charge

--Product Dimensions: φ100*32 mm/ 3.9*1.26inch

--Wire length: 1 meter /39inch

--Lighting Modes: Monochrome Gradient / Monochrome Flicker / RGB Gradient Adjustable (you can via remote control for timing or brightness settings)

--Warranty: 2 years

--Use Environment: Can be used on land and water, can be used for walls, fences and various swimming pools or fish ponds (be sure to place the photovoltaic panel of this product in an environment with sufficient sunlight)

--Installation Height: Within 1 meter from the swimming pool wall to the water

💡【Solar powered & energy-saving and environmentally friendly 】built-in 1800mAh 3.7V lithium-ion battery (18650 type), equipped with high-efficiency 1.2W Monocrystalline silicon solar panel (5V), can be quickly charged under direct sunlight. It can be fully charged in 4-5 hours (summer sunshine), and the gorgeous RGB lights can be used for 6-8 hours when fully charged

💡【Intelligent light control 】Automatically charge by absorbing light during the day and automatically light up at night

💡【Dynamic RGB color-changing effect 】Equipped with 13 high-brightness RGB LED lamp beads, it circulates to present charming multi-color patterns, creating a dreamy atmosphere for the pool, garden or outdoor party

💡【Durable & IP68 Waterproof 】The lamp head is completely waterproof (IP68 rating) and can be used safely underwater. The solar panel is IP65 waterproof. Note: The solar panel and cable connections must be kept dry

💡【Easy installation and wide range of uses 】safe voltage, glue on the bottom of the mounting plate and the rotating buckle of the lamp body are fixed and installed. It can be fixed on the pool wall, float on the water, or installed in the garden/terrace. It is very suitable for swimming pools, ponds, fountains, trails or outdoor decoration.

About Install :

1. Install the product by the pool. The photovoltaic panel installation conditions should avoid the shade of trees, other strong light or other environments that block the sun. When using, long press the lamp body switch to activate the lamp.

2. The circular installation fixing piece is glued to the tile position within 1 meter below the pool wall through tile glue, and the circular lamp body is rotated up through the buckle function.

3. Light control mode: First check the ambient illumination. The intelligent light control mode will only be started in a dark environment (ambient illumination <10LUX).

4. Brightness adjustment: Remote operation through the remote control. Please refer to the control function diagram for details. 40-50 products can be controlled synchronously.

5. The product has a memory function. After the product working mode is set, each time the intelligent light control mode is started, the lamp will light up according to the set working mode without repeating.

Note: When working at night, there should be no interference from other light sources on the surface of the photovoltaic panel above the product, which may cause the brightness to decrease, flicker or even not light up.