Thank you for visiting our store, here is a product description
------------------------
DESCRIPTION OF "2 PIECE SET":
The whetstone measures approximately 175 x 55 x 16 mm and the sharpening support clip measures about 58 x 19 x 16 mm. It is made with rough stone material GC, and the clip is made from polypropylene and alumina-based ceramic. Produced in Japan, this set includes a rough whetstone and a clip.
This two-item set features a rough whetstone essential for significant repairs such as chip repairs and rust removal, along with a clip that helps support and fix the angle of blades during sharpening. The whetstone size is slightly compact compared to professional-grade whetstones, making it just right for household knife sizes. As it comes with a base, there's no need for an additional stand.
It is suitable for use with a wide range of knives, including stainless steel and steel kitchen knives, scissors, and other knives, but not ceramic knives. Instructions for use include soaking the whetstone in water for about 10 minutes, attaching the clip at a 15-degree angle for sharpening, and cleaning with a cloth after use. The whetstone surface will reduce with usage and may require a flat stone for restoration.
Whetstone: 175 x 55 x 16 mm
Sharpening Support Clip: 58 x 19 x 16 mm
------------------------
DESCRIPTION OF "3-PIECE SET":
Size: Whetstone approximately 175×55×16mm, Dressing Whetstone approximately 63×27×15mm, Sharpening Support Clip 58×19×16mm. Material: Medium Whetstone/A, Dressing Whetstone/GC, Base/ABS, Clip/Polypropylene and Alumina-Based Ceramic. Origin: Japan. Set Includes: Medium Finish Whetstone, Dressing Whetstone, Clip.
This set contains a convenient medium whetstone for daily maintenance, a dressing whetstone for unclogging pores and fine adjustments, and a clip for fixing the angle of blades while sharpening.
The whetstone size is 175×55×16mm, slightly compact compared to professional stones, suitable for household knife sizes. The attached base negates the need for a separate stand.
Suitable for a wide range of blades like stainless steel and steel knives, scissors, and knives (not suitable for ceramic knives). Steps for use:
1. Soak the whetstone in water for about 10 minutes for proper moisture absorption.
2. Sharpen both sides of the knife blade at approximately a 15-degree angle against the whetstone surface. Use the included sharpening support clip to easily fix the blade angle.
3. After sharpening, wipe off the mud from the blade with a cloth.
4. Correct the flattening of the whetstone after each use, as the surface wears down.
5. Wash the used whetstone with water and dry it completely in the shade.
Note: The product band serves as the instruction manual, please check before use.
------------------------
DESCRIPTION OF "4-PIECE SET":
The Naniwa Kenma Sharpening Stone Set includes four pieces: a coarse stone for significant repairs, a medium stone for daily maintenance, a flattening stone for correcting the surface of the sharpening stones, and a clip to support and secure the sharpening angle of blades.
Product dimensions:
- Coarse/Medium Stone: 175×55×16mm
- Flattening Stone: 175×55×30mm
- Sharpening Support Clip: 58×19×16mm
Material:
- Coarse Stone: GC
- Medium Stone: A
- Flattening Stone: C
- Stand: ABS
- Clip: Polypropylene, Alumina Ceramic
Made in Japan, this set is suitable for a variety of blades including stainless steel and steel knives, scissors, and more, though not for ceramic knives. First, soak the stone in water for 10 minutes. Sharpen knives at a 15-degree angle using the support clip for easy fixing. For daily care, the #1000 stone is sufficient. For significant edge restoration, use the #220 stone first. Clean the blade after sharpening and correct the stone's surface with the flattening stone if needed. Wash and dry the stones completely before storing. Please check the bands of the coarse and medium stones for instructions before use.