Zebra ZD410  Direct Thermal Label Printer  USB, Lan or Wireless  with replacement power supply, USB Cable and Roll of 1000 2x1"  labels.

In good working order, good print quality.

Please choose correct option from drop down variations.

Wireless option allows you to print directly from the phone.

Technical support provided after purchase.

Before connecting printer to PC download and install ZDesigner driver on your PC. It is two versions of this driver- 5 and 10. If you using printer just to print postage labels- use older version 5 because it is more user friendly.

After printer is installed and connected go to Control Panel- Devices and Printers , right click on Printing preferences, set correct label size, go to Dithering, set to None and click Apply. Then go to Properties-Tools-Action and run Calibration. Printer will Calibrate itself and after that will be ready for printing.

To install as a network printer go to Control panel- Add printer-Network printer- Choose Printer isn't on a list- type in IP address from the label on side of printer- Device type: Print Server-Zebra-ZD410- Install, configure- Add label size, calibrate and you are ready to go.

Please bear in mind that Bluetooth is not for printing but for configuration purposes.

To configure wireless printer please install and run Zebra Setup Utility- Configure Printer Connectivity- Wireless- Static-Hostname (give name to your printer)- IP Address –Subnet Mask  –Default Gateway  – Next page ESSID: type in your router name (Case sensitive)– Choose security mode of your router-Next-tick String in WPA Settings and type in your router password in PSK Name –Next-Finish. Settings will be sent to printer. It will reset and if everything gone well you should see network LED will lit green and printer will print configuration label.

Next step is to install WIFI printer in your PC. Zebra Setup Utilities- Install New Printer-Install Printer-Choose ZD410 from the list- Next-Add new Printer- Add Port-give a name to printer-Type IP Address you assigned for printer- Port number will be assigned by computer-OK-Choose created port from the list-Finish. Printer driver will be installed and new printer icon will appear in Control panel.

If you need express delivery- please choose this delivery option from drop down menu when paying for the item.

Some troubleshooting tips:

If printer installs but when you send print job - nothing happens:

 Go to Control Panel - Devices & Printers - Right click on printer- choose Remove. Turn printer Off then On again. Wait until printer will  install again, go to Printer Preferences- Options-set label size- Tools- Run Calibration and  try to print delivery label again. Don't print Windows test print. If unsuccessful - repeat procedure until Windows install printer correctly or can try through Device Manager-Printers- Uninstall.

 If printer prints empty labels:

First off all make sure that labels are loaded facing up. 

Use labels supplied with printer. Some labels are designed for Thermal Transfer only- they work with ribbon only.

If printer is printing empty label after printing correct one- Run Calibration.

If you struggle with horizontal position adjustment- simply make bigger size label and adjust position of item on label accordingly.

If label is shifted to one side and you can't adjust position using Printing Preferences-Options go to  Zebra Designer -Document properties- Margins and adjust position here .

 Any other problems- please contact me. My details in Business Details at the bottom of listing.