Motorhome and campervan fresh water tank level kit from CBE consisting of a tank test panel with coloured LED indicators, tank probe and wiring harness. This kit is ideal if you are retro-fitting a water tank or if you don't have a level monitoring facility as part of your 12V control system. The LEDs light up when the test button is pressed and indicate FULL, 2/3, 1/3 and RESERVE.

This kit suits tanks up to 400mm in depth (see note below) and the test panel is compatible with CBE's & C-Line modular switch and socket system.

The probe is supplied with a gasket and mounting nut for fitting to a 60mm diameter hole in your water tank and the wiring harness connecting the probe to the test panel is approximately 4m long.

Note: If using with tanks of a shallower depth than 400mm, the probe can be cut down to suit as follows:

• Shortest probe - Do NOT cut (this detects a full tank)
• Mid length probe - should be cut to approximately 1/3 of your tank depth
• Two longest probes - both should be cut to approximately 2/3 of your tank depth