We strongly recommend you conduct a proper diagnosis from a qualified service technician before placing any orders. (Do NOT order a part based on picture alone.)

 Please Contact us if you are not sure if this item will fit your appliance.

Shipping Attention:

We use USPS/FedEx for shipping. We will send out the order within 3 business days. However, please DO UNDERSTAND that we CANNOT  control how soon the package will arrive. Due to various situations, sometimes it may take up to 7-10 days to get the first class package delivered.

**Please double check your shipping address before sending payment. We will only ship to the address you provide through Paypal and Ebay. Per Ebay’s policy we cannot alter or change your address, so please be absolutely sure before ordering. Buyer will be responsible for shipping charges incurred due to wrong address.

NO re-stocking fee.

If there’s any problem with your order, please contact us before leaving any negative/neutral feedback. We work hard to provide excellent service and quality parts for our customers. We will always work with you to resolve the problem.

New 021868-000 Refrigerator Freezer Door Seal Gasket (Gray) for Viking. Approximate Size is 39.49” x 16.77”. 

The 021868-000 refrigerator door gasket is designed to maintain the temperature for the compatible Viking refrigerators. Its primary function is to keep cold air inside while preventing energy loss and ensuring food stays fresh.

About the Installation:

1. Place the gasket in a basin or bathtub and soak it in warm water (120-160 °F) for 10 minutes to restore shape to any bent or wrinkled areas. Note: Do not use boiling water, and do not soak it for too long. After soaking, remove the gasket from the water and gently wipe dry. Lay the gasket flat along the side of the refrigerator. If there are any part arches or bends, stretch it flat and keep it in this state for at least 6 hours.

2. Install the gasket the next day: First press the four corners of the seal into the groove, then press the four sides in sequence. Smooth it by hand to make the surface even.

3. After closing the door, check for gaps. If there are gaps, reopen the door and use a hair dryer on low to medium heat on the area while smoothing the gasket with your hand until the gap disappears. If the door does not close properly or is difficult to close, check whether the gasket is jammed on the hinge side. If jammed, reopen the door and insert a sheet of paper from inside the refrigerator toward the outside at the jammed position. Close the door firmly and keep it closed, then slowly pull the paper out from the outside. Repeat several times until the jam is eliminated.

4. After completing all steps, close the door firmly and press it tight. Tape the refrigerator door shut to let it cool and set in shape. Keep it closed for at least 12 hours.

Part number 021868-000 replaces AP5702713.

Compatible with (but not limited to) the following models:

VCFF136SSS0, VCFF136SSS1, VCFF136SSS2, VCFF136SSS3, VCFF136SSS4, VCFF136SSS5, VCFF136SSS6, VCFF136SSS7, VCFF136SSS8.