113 Pcs. Techniks Brand New CAT 40 25,000 RPM Balanced CNC Tooling Package for CNC Mill (Various Make & Models), Includes 12 Pcs. of ER 32 Collet Chucks, 6 Pcs. of ER 16 Collet Chucks, 1 Set of ER 16 x 10 Pcs. 3/32" to 3/8" x 32nds & ER 32 18 Pcs. 7/32" to 3/4" x 32nds Collet Sets, 1 Set of ER 16 x 10 Pcs. 3/32" to 3/8" x 32nds & ER 32 18 Pcs. 7/32" to 3/4" x 32nds Steel Sealed Coolant Collet Set, 1 Pc. of 1/4", 3/8", 1/2", 5/8" , 3/4", 1" End Mill Holder, 26 Pcs.CAT 40 Pull Studs (45, 60 or 90 Degree), 2 Pcs. of 1/2" SPU Drill Chuck, 2 Pcs. of ER 16 & ER 32 Wrenches & 1 Pc. of Top/Side Mount Tightening Fixture. Enjoy Huge Saving On Techniks Certified Tooling!!!!
    Kit Includes:
  • 6 Pcs. Techniks Brand New CAT 40 ER 16 x 2.76" 25,000 RPM Balanced Collet Chucks w/Hex Nut, Part# 22225
  • 1 Set of Techniks Brand New ER 16 3/32" to 3/8" x 32nds .0002" T.I.R Collet Set, Part# 04209IS
  • 1 Set of Techniks Brand New ER 16 3/32" to 3/8" x 32nds Steel Sealed Precision Coolant Collet Set, Part# 04543IS
  • 2 Pcs. Techniks Brand New ER16-A Hex Collet Chuck Wrenches, Part# 04609
  • 12 Pcs. Techniks Brand New CAT 40 ER 32 x 2.76" 25,000 RPM Balanced Collet Chucks, Part# 22253
  • 1 Set of Techniks Brand New ER 32 7/32" to 3/4" x 32nds .0002" T.I.R Collet Set, Part# 04212IS
  • 1 Set of Techniks Brand New ER 32 7/32" to 3/4" x 32nds Steel Sealed Precision Coolant Collet Set, Part# 04546IS
  • 2 Pcs. Techniks Brand New ER32-E Spanner Collet Chuck Wrenches, Part# 04616
  • 1 Pc. Techniks Brand New CAT 40 1/4" x 3.00" 10,000 RPM Balanced End Mill Holder, Part# 22911
  • 1 Pc. Techniks Brand New CAT 40 3/8" x 3.00" 10,000 RPM Balanced End Mill Holder, Part# 22915
  • 1 Pc. Techniks Brand New CAT 40 1/2" x 3.00" 10,000 RPM Balanced End Mill Holder, Part# 22917
  • 1 Pc. Techniks Brand New CAT 40 5/8" x 3.00" 10,000 RPM Balanced End Mill Holder, Part# 22919
  • 1 Pc. Techniks Brand New CAT 40 3/4" x 3.50" 10,000 RPM Balanced End Mill Holder, Part# 22921
  • 1 Pc. Techniks Brand New CAT 40 1" x 4.00" 10,000 RPM Balanced End Mill Holder, Part# 22925
  • 2 Pcs. Techniks Brand New CAT 40 1/2" x 4.00" SPU Precision Keyless Drill Chucks, Part# 22403
  • 26 Pcs. Techniks Brand New CAT 40 Retention Knobs (Standard 45, 60 ro 90 Degree to fit your CNC Mill not special), Part#
  • 1 Pc. Techniks Brand New CAT/BT 40 Side/Top Mount Tightning Fixture, Part# 07884
Qty. Part No. Description
12 22253 CAT 40 x ER32-2.76
1 04212IS ER 32 x 18 pc. collet set - inch
1 04546IS ER 32 x 18 pc. steel sealed coolant collet set - inch
6 22225 CAT 40 x ER16-2.76
1 04209IS ER 16 x 10 pc. collet set - inch
1 04543IS ER 16 x 10 pc. steel sealed coolant collet set - inch
2 22403 CAT 40 x SPU 1/2 x 4"
1 22911 CAT 40 x SLN 1/4" x 3"
1 22915 CAT 40 x SLN 3/8" x 3"
1 22917 CAT 40 x SLN 1/2" x 3"
1 22919 CAT 40 x SLN 5/8" x 3"
1 22921 CAT 40 x SLN 3/4" x 3.5"
1 22925 CAT 40 x SLN 1" x 4"
26 - CAT40 (45,60 or 90 Degree) Pull Stud/Retention Knob
2 04616 ER32 - E Wrench
2 04609 ER16 - A Wrench
1 07884 CAT 40 Top/Side Mount Fixture
    CAT 40 ER Collet Chuck
  • Balanced to 25,000 RPM @ G2.5
  • T.I.R 0.0001" measured from taper to collet pocket
  • Techniks Lab Certified each holder comes with a certificated verifying accuracy and balance
    ER Collet
  • 0.0002" maximum run-out
  • Each collet hand inspected
    ER Steel Sealed Coolant Collet
  • Sealed to 2000 PSI
  • No plugs
  • Protect tool holders from contaminants
  • Use with standard ER Power Coat nuts
    CAT 40 End Mill Holder
  • High precision bore (H5) is best in industry
  • Balanced to 10,000 RPM
  • Taper ground to AT3 for maximum spindle contact
CAT 40 ER Collet Chucks
Part# Description l1 D Max. Shank Stop Screw Wrench
22225 CAT 40 x ER 16 - 2.76", hex nut 2.76" 1.08" .406" 06083 04609
22253 CAT 40 x ER 32 - 2.76", slotted nut 2.76" 1.97" .788" 06089 04616

Other Available CAT 40 ER Collet Chucks

Track Page Views With
Auctiva's FREE Counter