• Vehicle Information Fitment:
  •  
  • 2014 - 2021 JEEP CHEROKEE (for vehicles with Dual Piston Front Caliper) 
  • Package Include:
  •  
  • 1Pcs Brake Calipers 
  •  
  • Steps to replace a brake Caliper:
  •  
  • For 2014 - 2018 2019 2020 2021 JEEP CHEROKEE Rear Left Brake Calipers w/ Bracket

    Vehicle Information Fitment:

     

    2014 - 2021 JEEP CHEROKEE (for vehicles with Dual Piston Front Caliper)

     

    Package Include:

     

    1Pcs Brake Calipers 

     

    Steps to replace a brake Caliper:

     

    If you are comfortable with car repairs and have the necessary tools, you can replace the brake caliper yourself. The process might vary slightly for different makes and models. Here are the general steps to replace a brake caliper. 
    1. Lift the vehicle
    Use the lug wrench to loosen the lug nuts on the tire and then use the jack to lift the vehicle off the ground. Secure the vehicle with jack stands.
    2. Remove the tire
    Use the lug wrench to remove the lug nuts and then remove the tire from the vehicle.
    3. Remove the caliper mounting bolts
    Use the brake caliper tool to remove the caliper mounting bolts that hold the caliper in place.
    4. Remove the caliper
    Once the mounting bolts are removed, gently pry the caliper off the brake rotor. Be careful not to damage the brake hose as you remove the caliper.
    5. Install the new caliper
    Place the new caliper over the brake rotor and secure it in place with the caliper mounting bolts. Torque the bolts to the manufacturer’s recommended specifications using a torque wrench.
    6. Install the tire
    Replace the tire and lug nuts, torque to spec, and then lower the vehicle off the jack stands.
    7. Bleed the brake system
    Use a brake bleeding kit to remove any air from the brake system. This is an important step to ensure that the brakes are working properly. Continually top up the fluid in the reservoir as you bleed the brakes.
    8. Test the brakes
    Once the brake caliper is installed and the brake system has been bled, test the brakes to ensure they are functioning properly.

    Construction of Brake Calipers:

    1:Caliper Housing: The caliper's main body houses the other components and encloses the brake pads and rotor.
    2:Pistons: These are cylindrical components located inside the caliper housing. When hydraulic pressure is applied, the pistons extend outward to push the brake pads against the rotor.
    3:Seals and Dust Boots: These ensure a tight and reliable seal around the pistons, protecting them from dirt and contaminants. Proper seals are vital to prevent brake fluid leaks and maintain hydraulic pressure.
    4:Brake Pad Clips: These clips securely hold the brake pads within the caliper.
    5: Bleeder Screw: A small screw used to release air and excess brake fluid from the caliper during brake bleeding procedures.

    Different Types of Brake Calipers:

    1:Floating Calipers: Floating calipers are the most common type used in modern vehicles. They have one or two pistons on one side of the rotor. When the brakes are applied, the caliper slides inward, causing the piston(s) to press the brake pads against the rotor. Floating calipers are relatively simple and cost-effective, widely used in various vehicles.
    2:Fixed Calipers: Fixed calipers have pistons on both sides of the rotor, providing more even pressure distribution and improved braking performance. Unlike floating calipers, fixed calipers do not slide; they remain stationary during braking. This design reduces caliper flexing and ensures a more consistent brake pad-to-rotor contact.
    3:Sliding Calipers: Sliding calipers are also known as pin-slide calipers. They have one or two pistons on one side of the rotor, similar to floating calipers. However, sliding calipers use pins or sliders to allow the caliper to move back and forth slightly during braking. This design helps equalize pressure on both sides of the rotor and promotes even brake pad wear.

     


    Item Specifics
    Brand WHEE
    Manufacturer Part Number am181811tor
    Placement on Vehicle Left,Rear
    Warranty 1 Year
    Custom Bundle No
    Fitment Type Direct Replacement
    Mounting Hardware Included Yes
    Listing Include One Piece Brake Caliper
    Features Positive Mold Technology
    Copper Washers Included Yes
    Mounting Hardware Yes
    Brake Bracket Included Yes
    Grade Description Premium
    Finish Chrome Plated
    OE/OEM Part Number 18B5493 Brake Calipers replacement
    Bleeder Port Size M10X1
    Inlet Port Size M10X1
    Piston Material Steel
    Type Brake Calipers & Bracket
    Banjo Bolt Included Yes
    Material High Quality Cast Iron
    Brake Piston Count 1
    Piston Size(mm) φ42.9

    Payment
    1,We accept multiple payment methods.
    2,Payments are expected within 7 days  after the last winning auction is closed; Otherwise Unpaid Item Dispute  will be filed with eBay.
    Shipping
    1,All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  3-5 business days.
    2,The tracking  number will be given for the customer to check the shipping status online (registered or faster service only).
    3,We are not  responsible for any wrong or undeliverable addresses. Please verify and  update your shipping address on eBay during checkout.
    Returns

    1.We stand behind every product we sell.
    2.All of our brand new items come with a 30-Days money-back guarantee.

    Warranty
    1,We stand behind every product we sell.
    2,All of our brand new items come with a 60-Days money-back guarantee.
    3,We define the item as defective only if it doesn't function as described.
    4,It is the buyer's responsibility to understand the item description before bidding.
    5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the  original item and pay for the S&H cost for the replacement.
    6,We  will refund the purchase price if the replacement is not available or buyer  prefers a refund and send the original item back at his/her own cost.
    7,Shipping & handling cost are not refundable.
    8,Man-made damage by  abuse or wrong operation is not covered by this warranty.
    9,No  product liability insurance is assumed.
    FAQ
    Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 1 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My store accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.

    Excellent Delivery
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    For 2014 - 2018 2019 2020 2021 JEEP CHEROKEE Rear Left Brake Calipers w/ Bracket

    Vehicle Information Fitment:

     

    2014 - 2021 JEEP CHEROKEE (for vehicles with Dual Piston Front Caliper)

     

    Package Include:

     

    1Pcs Brake Calipers 

     

    Steps to replace a brake Caliper:

     

    If you are comfortable with car repairs and have the necessary tools, you can replace the brake caliper yourself. The process might vary slightly for different makes and models. Here are the general steps to replace a brake caliper. 
    1. Lift the vehicle
    Use the lug wrench to loosen the lug nuts on the tire and then use the jack to lift the vehicle off the ground. Secure the vehicle with jack stands.
    2. Remove the tire
    Use the lug wrench to remove the lug nuts and then remove the tire from the vehicle.
    3. Remove the caliper mounting bolts
    Use the brake caliper tool to remove the caliper mounting bolts that hold the caliper in place.
    4. Remove the caliper
    Once the mounting bolts are removed, gently pry the caliper off the brake rotor. Be careful not to damage the brake hose as you remove the caliper.
    5. Install the new caliper
    Place the new caliper over the brake rotor and secure it in place with the caliper mounting bolts. Torque the bolts to the manufacturer’s recommended specifications using a torque wrench.
    6. Install the tire
    Replace the tire and lug nuts, torque to spec, and then lower the vehicle off the jack stands.
    7. Bleed the brake system
    Use a brake bleeding kit to remove any air from the brake system. This is an important step to ensure that the brakes are working properly. Continually top up the fluid in the reservoir as you bleed the brakes.
    8. Test the brakes
    Once the brake caliper is installed and the brake system has been bled, test the brakes to ensure they are functioning properly.

    Construction of Brake Calipers:

    1:Caliper Housing: The caliper's main body houses the other components and encloses the brake pads and rotor.
    2:Pistons: These are cylindrical components located inside the caliper housing. When hydraulic pressure is applied, the pistons extend outward to push the brake pads against the rotor.
    3:Seals and Dust Boots: These ensure a tight and reliable seal around the pistons, protecting them from dirt and contaminants. Proper seals are vital to prevent brake fluid leaks and maintain hydraulic pressure.
    4:Brake Pad Clips: These clips securely hold the brake pads within the caliper.
    5: Bleeder Screw: A small screw used to release air and excess brake fluid from the caliper during brake bleeding procedures.

    Different Types of Brake Calipers:

    1:Floating Calipers: Floating calipers are the most common type used in modern vehicles. They have one or two pistons on one side of the rotor. When the brakes are applied, the caliper slides inward, causing the piston(s) to press the brake pads against the rotor. Floating calipers are relatively simple and cost-effective, widely used in various vehicles.
    2:Fixed Calipers: Fixed calipers have pistons on both sides of the rotor, providing more even pressure distribution and improved braking performance. Unlike floating calipers, fixed calipers do not slide; they remain stationary during braking. This design reduces caliper flexing and ensures a more consistent brake pad-to-rotor contact.
    3:Sliding Calipers: Sliding calipers are also known as pin-slide calipers. They have one or two pistons on one side of the rotor, similar to floating calipers. However, sliding calipers use pins or sliders to allow the caliper to move back and forth slightly during braking. This design helps equalize pressure on both sides of the rotor and promotes even brake pad wear.

     


    Item Specifics
    Brand :WHEE
    Manufacturer Part Number :am181811tor
    Placement on Vehicle :Left,Rear
    Warranty :1 Year
    Custom Bundle :No
    Fitment Type :Direct Replacement
    Mounting Hardware Included :Yes
    Listing Include :One Piece Brake Caliper
    Features :Positive Mold Technology
    Copper Washers Included :Yes
    Mounting Hardware :Yes
    Brake Bracket Included :Yes
    Grade Description :Premium
    Finish :Chrome Plated
    OE/OEM Part Number :18B5493 Brake Calipers replacement
    Bleeder Port Size :M10X1
    Inlet Port Size :M10X1
    Piston Material :Steel
    Type :Brake Calipers & Bracket
    Banjo Bolt Included :Yes
    Material :High Quality Cast Iron
    Brake Piston Count :1
    Piston Size(mm) :φ42.9

    1,We accept multiple payment methods.
    2,Payments are expected within 7 days  after the last winning auction is closed; Otherwise Unpaid Item Dispute  will be filed with eBay.
    1,All domestic orders will be shipped via USPS, UPS  or FedEx from our US warehouse and usually arrives to your door in about  3-5 business days.
    2,The tracking  number will be given for the customer to check the shipping status online (registered or faster service only).
    3,We are not  responsible for any wrong or undeliverable addresses. Please verify and  update your shipping address on eBay during checkout.

    1.We stand behind every product we sell.
    2.All of our brand new items come with a 30-Days money-back guarantee.

    1,We stand behind every product we sell.
    2,All of our brand new items come with a 60-Days money-back guarantee.
    3,We define the item as defective only if it doesn't function as described.
    4,It is the buyer's responsibility to understand the item description before bidding.
    5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the  original item and pay for the S&H cost for the replacement.
    6,We  will refund the purchase price if the replacement is not available or buyer  prefers a refund and send the original item back at his/her own cost.
    7,Shipping & handling cost are not refundable.
    8,Man-made damage by  abuse or wrong operation is not covered by this warranty.
    9,No  product liability insurance is assumed.
    Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 1 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My store accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.

    wheeltech_All rights reserved.