The ES592 Interface Module provides one ETK connection plus two CAN and two LIN interfaces. For connecting and synchronizing XETK ECUs, additional interface hardware or measurement modules, the ES592 module is equipped with two further Ethernet interfaces in addition to the PC port.

• The ES5xx product family contains compact ECU and bus interface modules for testing and calibration applications. They connect the ETK/XETK ECU interface as well as the LIN, CAN, CAN FD, and FlexRay serial buses to the host PC. All ES5xx modules are supported by the software INCA.
• 
  
• Universal interface module
• Rugged compact metal housing
• PC connection via Ethernet interface (100 Mbit/s)
• 1 ETK and 2 XETK/Ethernet interfaces for demanding measurement applications
• 2 CAN interfaces
• 2 LIN interfaces
• Acquisition of time synchronous measurements
• Seamless integration with INCA

• Technical data

  Size and Weight
  Dimensions (HxWxD)	45 mm x 127 mm x 160 mm / 1.75 in x 5.0 in x 6.3 in (housing)
  Weight	0.8 Kg / 1.8 lbs
  Environment
  Temperature range	-40 °C to +70 °C / -40 °F to +158 °F (operation)
  	-40 °C to +85 °C / -40 °F to +185 °F (storage)
  Relative humidity	0% to 85 % (Operations) , non-condensing
  	0% to 95 % (Storage)
  Tested for	Mechanical shock, vibration, fall, temperature shock, temperature alteration, according to EN 60068 and ISO 16750
  Ingress protection	IP30
  Operating Current Range	9 A Max. (module max. 3A; o/p current per ETH 2 A max.)
  Power supply
  Operating voltage	7 V to 29 V DC
  Power consumption (at 14.4 V)	500 mA at 14.4 V (typical, operation)
  	20 mA at 14.4 V (typical, stand-by)
  Power management (wake-up / stand-by)	Power-on/off when Ethernet traffic starts/stops (PC or upstream module on/off)
  Protection	Reverse voltage protection, load dump protection
  Ethernet interfaces
  Connection and protocols	1 x 10 / 100 BASE-T (Upstream)
  Time synchronization	Time resolution: 1 μs
  Power supply of connected devices	ES4xx and ES6xx measurement modules, XETKs
  ECU and bus interfaces
  	Universal ECU interface for demanding measurement applications
  LIN	2 channels, LIN V2.2A
  Low Speed CAN :	CAN Transceiver: TJA1054A
  	Speed: Max. 125 kBaud
  	LIN Transceiver: MCZ33661EF
  	Specification: LIN V2.1
  CAN	2 channels, optionally High Speed (up to 1 MBaud) or Low Speed
  High Speed CAN :	CAN Transceiver: TJA1040
  Operating Mode	Basic, Compatibility, Advanced
  Protocol Transfer	Single Mode supports speed of 8Mbit/s Block Mode supports either 8Mbit/s or 100 Mbit/s
  Status display
  LEDs	Operation, interfaces, synchronization
  Compatible hardware
  PC / ETAS Upstream Module	Desktop or Laptop PC with Ethernet port, ES592, ES593-D, ES595, and ES600 Network and Interface Modules
  ETAS Downstream Module	ES592, ES593-D, ES595, ES600 Network and Interface Modules, ES4xx and ES6xx Measurement Modules, ES910 Prototyping and Interface Module, XETK
  Support by ETAS software
  INCA	INCA V6.2.1 and up INCA-LIN V6.2.3 and up
  Host interface
  Fast Ethernet	2 x 10 / 100BASE-T Ethernet (Downstream), ETH1, ETH2 supports ETAS device synchronization mechanism
  Host PC	Supports 100Mbit/s, full duplex RJ45 connection with 32-bit data bus
  Protocol	TCP/IP, Ethernet Switching (Layer 2), IEEE802.3

Installed but hardly used, excellent con - see photos

Download technical datasheet from manufacturer's website for more details.