SHIPPING IS PART OF THE PRICE ON THIS ITEM. SHIPPING IS TRANSPARENTLY CHARGED FOR EACH ITEM PURCHASED FROM THIS LISTING. PLEASE DO NOT CONTACT US REQUESTING FREE SHIPPING.
JL AUDIO VX1000/5i
1000 W 5 Channel Class D System Amplifier with Integrated DSP
FEATURES
- 5-Channel
- Class D
- System Amplifier with Integrated DSP
- 100 W x 4 at 2 Ω + 600 W x 1 at 2 Ω - 14.4V
Simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.
The second generation NexD2™ amplifier VX1000/5i efficiently and effortlessly powers a complete audio system. It can drive four main speakers with 75 W x 4 at 4 ohms while also powering a subwoofer with up to 600W at 2 ohms. Bridging the main channels converts it into a very powerful, 3-channel system amplifier with up to 200W x 2 at 4 ohms on the main channels and 600W at 2 ohms on the subwoofer channel.
The NexD2™ full-range technology in the main channels of this amplifier is DSP-controlled and boasts a reduced loop area design utilizing DirectFET™ outputs for sensational fidelity, very low noise and incredible efficiency. The subwoofer channel features an optimized low-frequency version of the NexD2™ technology. Being ultra-compact, it has all connections on one side. This greatly simplify installation into small spaces.
All amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone). Say goodbye to switches and knobs with the appropriate JL Audio TüN™ Software application installed.
Amplifier includes:
- Power Connector (for 2 AWG wire)
- Analog Input/Pre-Out Harness
- Speaker Output Harness
- Subwoofer Output Connector
- 6 ft A/B USB Cable
Power Rating (RMS) Power at 14.4 V
- Main Channels at 4 Ω: 75 W RMS x 4
- Main Channels at 2 Ω: 100 W RMS x 4
- Main Channels - Bridged at 4Ω: 200 W RMS x 2
- Subwoofer Channel at 4 Ω: 400 W RMS x 1
- Subwoofer Channel at 3 Ω: 500 W RMS x 1
- Subwoofer Channel at 2 Ω: 600 W RMS x 1
- Subwoofer Channel at 1.5 Ω: N/A
Specifications
- Frequency Response (Main Channels): 12 Hz - 24 kHz (+0, -1dB)
- Frequency Response (Subwoofer Channel): 12 Hz - 1 kHz (+0, -1dB)
- S/N Ratio, referred to highest rated power (Analog Inputs - Main Channels): 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to highest rated power (Analog Inputs - Main Channels): 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to highest rated power (Analog Inputs - Subwoofer Channel): 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W (Analog Inputs - Main Channels): 80 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W (Analog Inputs - Subwoofer Channel): 72 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to highest rated power (Digital Inputs - Main Channels): 100 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to highest rated power (Digital Inputs - Subwoofer Channel): 99 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W (Digital Inputs - Main Channels): 81 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- S/N Ratio, referred to 1 W (Digital Inputs - Subwoofer Channel): 73 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
- Damping Factor at 2 Ω: >50 / 50 Hz
- Damping Factor at 4 Ω: >150 / 50 Hz
- THD+N @ Rated Power (Main Channels): <1% at 2 Ω per Ch.
- THD+N @ Rated Power (Subwoofer Channels): <1% at 2 Ω per Ch.
- Input Voltage Range at RCA Inputs: 200 mV - 16 V RMS
- Min.Copper Power / Ground Wire Gauge: 4 AWG wire
- Fuse Rating: 80 A (AFS, AGU or MaxiFuse™)