Converts the Polaris Ranger wiper kit (part number 2879754 compatible with 2013-2019 models) to have intermittent wiper function.  Adds 1-per-8-second, 1-per-5-second, and 1-per-3-second intermittent functionality to the factory slow and fast continuous functions.  Plug-and-play with the factory wiper harness - no splicing necessary.

The internal software monitors the wiper switch to determine if the wiper speed needs to change.  Much like paddle shifters can be used to sequence an automatic transmission up or down the gears, the wiper switch tells the software to increase or decrease the current setting.  Move the switch briefly to the high-speed position and then back to the middle (low-speed) position will shorten the delay one notch.  Moving the switch briefly to the off position and back to the middle will lengthen the delay one notch.  There are five possible states: off, once every 8 seconds, once every 5 seconds, once every 3 seconds, continuous slow, and continuous fast.  Use the wiper switch as previously described to sequence through the possible states.  Hold the switch in the high-speed position to instantly move through the intermittent settings into the continuous-fast wipe state.  Leave the switch in the off position to immediately go to the off state.  

Installs in the compartment holding the wiper motor and the wiper switch.  All necessary hardware and instructions included.

2" x 3" x 1" high.