For sale is a custom designed Cheek Rest Mount with either a Black or FDE cheek rest component - All other parts will be black in color. This is designed to fit the rifle stock that is included with the Benjamin Marauder PCP Air Pistol. This works great for airguns with scopes or red-dots mounted; the cheek rest may be too tall for use with iron sights.
*I also have a different style cheek rest for the Crosman 1399 stock - see my other listings.
This will also fit other Crosman air guns that accept the Crosman 1399 Custom Shoulder Stock such as the following air guns: PC77, 1377, 1322, 2240, 2300, 1740, 2400, etc.
This is designed for right-handed air-gunners; If you would like a left-hand version, send me a note.
All hardware is included, which is stainless steel; also includes a hex-wrench. No extra tools or disassembly required.
This Cheek Rest assembly weighs 4.4 oz/137 g with hardware.
The Cheek Rest Mount is adjustable front-to-back and in height. It clamps on using a soft rubber-like (TPU) insert to hold tightly without damaging the stock. The top of the cheek rest is angled to be in line with the sights.
The Cheek Rest Mount is 3D printed in the USA, using Carbon Fiber infused black ABS (premium milled carbon fiber, NOT powder or dust) which is also made in the USA. This plastic will not warp when exposed to outdoor heat, or left in the sun. The Mount has a deep black slightly textured surface. The cheek rest component is 3D printed using PETG in either black or FDE - you pick. PETG is also heat resistant.
*Please note that the colored parts shown in the pictures are NOT what you will receive, they were printed using different colors to help the buyer visualize the different components and how they fit together.
Installation:
1 - Install the two main clamp pieces with the flexible rubber part centered on the stock, install the four 25mm long screws and M3 nylock nuts using the provided hex-wrench. These screws need to be snug and not too tight so that this main assembly does not slide forward on the stock; the two halves do not need to touch.
Make sure the nylock nuts seat correctly into the hex-shaped recess on the smaller, left-side clamping block.
2 - Assemble the cheek-rest component onto the T-shaped piece using the two 16mm long screws with washers and M3 nylock nuts using the provided hex-wrench. Make sure the nylock nuts seat correctly into the hex-shaped recess on the T-shaped piece..
3 - Insert the two M4 nuts into the hex-shaped recess of the main clamp piece from step #1. Press the two M4x20mm screws into the two knobs; you might have to screw them into the inserted nuts to properly seat the screws and nuts before attaching the T-shaped piece.
4 - Attach the T-shaped piece using the the two knobs. Set the height to match your scope or other optic - the knobs do not need to be very tight, just snug enough to prevent movement.
DO NOT OVERTIGHTEN, the screws need to be just snug enough so there is no play.
DONE - Enjoy your new Cheek Rest.