Specification:
Condition: Brand New & High Quality
Item Location: USA
Product Type: Alternator
Voltage: 12V
Amperage: 150 Amp
Pulley Class: 5-Groove Decoupler Pulley
Pulley Groove OD: 55.9 mm
Rotation Direction: CW (Clockwise)
Fan Type: Internal
Regulator Type: Internal
Terminal Type: 2-Pin (DFM, RVC)
Plug Clock: 3:00
Replace
Part Number:
11682, 11682N,
13592811, 13520817, 13529304, 13592810, 22892568, 22892569, 22905553, 22996928,
23136231, 23286558, 95519894, 1042101900, 1042101901, 1042101902, 1042101960,
1042101961, 1042101962
Fitment:
Buick Regal
(2014-2017) L4-2.0L
Buick Regal
Sportback (2018-2019) L4-2.0L
Buick Regal
TourX (2018-2020) L4-2.0L
Cadillac ATS
(2013) L4-2.0L/2.5L
Cadillac ATS
2014-2016 L4-2.5L (Exc Start/Stop Feature)
Cadillac ATS
2014-2019 L4-2.0L (Exc Start/Stop Feature)
Cadillac CTS
2014-2019 L4-2.0L (Exc Start/Stop Feature)
Chevrolet Blazer
(2019-2021) L4-2.5L
Chevrolet Camaro
(2016-2020) L4-2.0L
Chevrolet Colorado
(2015-2023) L4-2.5L
Chevrolet Impala
(2014-2019) L4-2.5L
Chevrolet Malibu
(2013-2014) L4-2.0L
Chevrolet Malibu
(2013-2015) L4-2.5L
Chevrolet Malibu
(2016-2019) L4-2.0L
Chevrolet Malibu
Limited (2016) L4-2.5L
GMC Canyon
(2015-2019) L4-2.5L
Package
Includes: (As the pictures shown)
1x Alternator
Disassembly and assembly
of alternator:
On-board dismantling of
generators
1.
Disconnect the negative battery terminal cable Before disconnecting the
negative battery terminal cable, make a record of the information stored in the
ECU and other components, such as the DTC (diagnostic trouble code), radio
channel selected, seat position (with memory system), steering wheel position
(with memory system), etc.
2.
Disconnect the generator power cord and connector
3.
Disassemble the generator. Loosen the generator penetration bolts or tensioner
pulleys, then remove the drive belt. Remove the generator fixing bolts.
Alternator mounting
1.
Install the generator.
① Install the entire
generator in reverse order of disassembly.
② Install the
generator at the front end of the engine by penetrating bolts
③ Preliminary mounting
bolts.
2.
Install the drive belt.
① Install the drive
belt.
② Adjust the belt
tension by moving the generator with something like the handle of a hammer
③ Tighten the mounting
penetration bolts and bolts after ensuring the deflection of the drive
belt.
3.
Connect the wiring harness.
① Generator cable and
install the short-circuit-proof cover.