Shop Categories
OtherTIG TORCH SETSAIR-COOLED TIG TORCH SETSAIR-COOLED 1-PIECE INLINEAIR-COOLED 1-PIECE DINSEAIR-COOLED 1-PIECE STUD ADAPTAIR-COOLED 2-PIECE TERMINALAIR-COOLED 2-PIECE LENCO/TWECOAIR-COOLED 2-PIECE DINSEWATER-COOLED TIG TORCH SETSWATER-COOLED INLINEWATER-COOLED DINSEWATER-COOLED STUD ADAPTTIG TORCHES WITH ON/OFF SWITCHTIG TORCH PARTS & ACCESSORIESAIR-COOLED HEADS AND BODIESWATER-COOLED HEAD AND BODIESAIR-COOLED CABLESWATER-COOLED CABLES AND HOSESAIR-COOLED WELDER CONNECTORSWATER-COOLED WELDER CONNECTORSARGON HOSE ACCESSORIESWATER HOSE ACCESSORIESCABLE COVERSTIG TORCH CONSUMABLESFOR 9-20-25 SERIES TORCHESACCESSORY KITSBACK CAPSGASKETS/INSULATORSCOLLETSCOLLET BODIESNOZZLES - STANDARDNOZZLES - GAS LENSNOZZLES - LARGE DIAM. GAS LENSFOR 17-18-26 SERIES TORCHESACCESSORY KITSBACK CAPSGASKETS/INSULATORSCOLLETSCOLLET BODIESNOZZLES - STANDARDNOZZLES - GAS LENSNOZZLES - LARGE DIAM. GAS LENSNOZZLES - STUBBYARGON-SAVING SERIESMIG GUNSMIG GUNSCOMPATIBLE WITH LINCOLN/TWECOCOMPATIBLE WITH MILLERCOMPATIBLE WITH EUROMIG GUN CONSUMABLES AND PARTSREPLACEMENT FOR TWECO/LINCOLNLIN 100L & TWECO MINI #1LIN 200 TO 400 & TWECO #2, #4LIN 300 AND 400 & TWECO #3, #4ACCESSORY KITSREPLACEMENT FOR MILLERMILLER M10, M15/HOBART H9, H10MILLER M-25 & M-40ACCESSORY KITSGAS EQUIPMENTOTHER GAS REGULATORSGAUGES WITH 1/4" NPT THREADGAUGES WITH 1/8" NPT THREADCHROME PLATED GAUGESCO2 GAUGESOXYFUEL WELDING/BRAZING TIPSOXYFUEL CUTTING TIPSOXYFUEL HEATING TIPSWELDING & CUTTING EQUIPMENTPLASMA TORCHESPLASMA PARTS & CONSUMABLESPLASMA TORCHESFILLER METALSTITANIUMMAPP & PROPANE BRAZING TORCHESWELDING CABLEELECTRODES OVENS/DRYERSMAGNETIC HOLDERSGRINDING & CUTTING WHEELSFOR STEELFOR STAINLESS STEELFOR ALUMINUMFOR STONE/MANSONRYMULTI-PURPOSEGLOVES AND PROTECTIVE APPARELWELDING HELMETSCHANNEL DRAINSPVC VALVESWELDING FLUXES AND CHEMICALSBRAZING FLUXESWELDING CABLE ASSEMBLIES
Add to Favorite Sellers Sign up to Newsletter View Feedback Contact Seller Visit seller's eBay Shop About Seller Page

SÜA - RBCuZn-C - Low-Fuming Bronze Brazing Rod - Flux Coated - 18" x 3/32"

SÜA - RBCuZn-C - Low-Fuming Bronze Brazing Rod - Flux Coated - 18" x 1/8"
Item Description
SÜA - RBCuZn-C - Low-Fuming Bronze Brazing Rod - Flux Coated - 18" x 1/8"
  • LFBF (Fluxcoated low fuming bronze) is a general  purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F)
  • "A "must have" filler metal for every machine shop, LFBF is excellent for building up wearing surfaces or large areas where successive layers must be added; galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service; high silicon level promotes low fuming 
  • ***READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***
  • Available in different sizes: 1/16", 3/32"and  1/8". Rod Length: 18" for easier maneuverability while welding since flux coated rods cannot be bend. These SÜA rods have the alloy and rod diameter printed on the coat for easier identification. 
  • Available in different package weights: 1/2 Lb, 1 Lb, 2 Lb and 5 Lb - Choose rod diameter and package quantity from the menu.
  • "Recommended Braze-Welding Procedure: Preheating is recommended for some applications, however, overheating should be avoided. Voids may be formed in the joint by entrapped zinc vapors. Bevel cracks or heavy sections. Clean the area to be brazewelded as thoroughly as possible. Joint clearances of 0.002" - 0.005" (0.05 - 0.13mm) are suitable. Using a slightly oxidizing flame, preheat the part to be brazed. If using LFB, dip the rod into the bronze brazing flux (there is no need for more flux if using LFBFC) and then back to the area being brazed, while keeping the torch in constant motion to avoid overheating. The molten drops of LFB or LFBFC will follow the heat of the torch flame. Repeat the process until the joint is filled (Note: A benefit to using LFBFC over LFB is that it is not necessary to remove flux residue between passes). Allow the part to cool slowly before removing any slag, then use a wire brush to bring out a nice yellow brass color."

About Us

Mundaka Technologies, Inc is a US-based company with an inherited expertise of more than 40 years in the welding, cutting and industrial gases business. We serve the United States and the Latin American markets from our facilities in Fort Lauderdale FL. All of our products are selected with quality and affordability in mind. Our customer service team is always available and committed to answering our client's questions and needs. NO Answering Machines, NO Excuses.

Payment

We accept all major payment methods: PayPal, Visa, MasterCard, AMEX, Discover, and Bank Transfers.

We charge 7% sales tax on all orders shipping within the State of Florida. We sell with tax exemption if we are provided by the customer with a valid Florida resale certificate.

Shipping

We ship the same business day for orders placed before 12:00 EST. USPS Priority Mail (1-3 days), FedEx and UPS Ground (1-5 days), are our preferred shipping methods and delivery dates may vary according to tho the final destination of the order. For smaller and lighter items we use USPS First Class (1-4 days). We offer free shipping to the 48 contiguous continental states.

Returns

If you are not happy with your product, just request a return on eBay or get in contact with us, We will accept your return and refund your payment, no questions asked!. If you changed your mind or bought a product by mistake, Just send it back! we will refund your payment. Is the product that you bought does not fit your current equipment, No problem, just call us and we will help you to find the right equipment for you and exchange it. We are committed to providing our customers with a solution.

Disclaimer

Mundaka Technologies Inc offers products that can operate at high temperature, high pressure, and high voltage/amperage. These products are intended for professional or trained users.
Mundaka Technologies does NOT sell any products intended to diagnose, treat, cure, or prevent any disease and the products bought from Mundaka Technologies Inc should never be used as a reference to measure or dosage medical oxygen or any other medical gases or substances to humans or animals.
Mundaka Technologies, Inc. assumes no liability for misuses of this products.
Some of the products offered here might be described as "Compatible with" other manufacturer´s equipment and brands. It is not in the Mundaka Technologies Inc intentions to resemble, copy, counterfeit or violate trademarks, patents, brands or any other form of intellectual property owned by other companies not affiliated, associated, authorized, endorsed by, or in any way officially connected to Mundaka Technologies Inc.
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.