Choose between a size 14" or 17" circle. Choose either 1 digit, 2 digit or 3 digit number of your preference and send us your preference in the notes section of your purchase or simply by sending us a message upon ordering. Please note, we do our best to make the numbers as large as possible with an eye towards aesthetics and design. 

In general, 1 digit numbers will be approx. 9" (in height) on 14" circle and 10" (in height) on a 17" circle. For 2 digit numbers, approx. 7.5" (in height) on 14" circle and 8.5" (in height) on a 17" circle. For 3 digit numbers, approx. 5" (in height) on 14" circle and 6" (in height) on a 17" circle. See Ebay pictures for how the numbers look, we have numbers 0-9 available. 

Our 30 mil matte white magnetic vinyl and your choice of race numbers (using 3M 2080 gloss black film) are both precisely cut using computer guided equipments. Then they are carefully hand applied to make sure the race numbers are centered on the magnetic vinyl circle. Our numbers will look sharp and fade free for many years to come with proper use and care.

These magnetic race numbers can literally be applied in 10 seconds or less! They adhere directly onto doors and/or hood that are steel/metal (not aluminum) - and must not be layed on top of PPF (paint protection film) otherwise the magnetic adhesion will diminish. 

Best practice! Wax the panels a minimum of 48 hours prior to applying the magnetic race numbers. Always make sure to prep both surfaces of the race numbers and the vehicle panels before applying. Clean surface, clear of debris, dirt & grime not only provide for maximum adhesion, it helps avoid scratches and damage to your vehicle's paint surface. Be sure both the vehicle paint and the magnetic side of the stone guards are dry when applying. 

Remove after use whenever possible. Remove prior to washing your vehicle to avoid damage and prevent moisture seeping in between the paint and the magnetic surface. When cleaning the race numbers, use only mild soap and water to clean and wipe dry. 

Never lift and drag the race numbers off the vehicle to avoid scratching your vehicle. Gently lift in place until race numbers is completely removed from the vehicle.

We recommend storing the vinyl magnets flat in a clean, dry area whenever possible. Avoid storing the set magnetic side to magnetic side together as it affects pole alignment. If rolling, store the magnetic vinyl with the non-magnetic side out.