D-C-FIX  waterproof, washable tile wallpaper Splashback

 

ITEM DESCRIPTION

 100% Official D-C-Fix Licensed Product

Easy to apply

Simply peel and stick

FREE UK Postage

This listing is priced per roll

Roll size is 67.5CM X 15M

BRAND NEW D C FIX WASHABLE WIPEABLE WALLPAPER TO COVER SMOOTH WALLS OR EXISTING TILES

This wallpaper is meant to run across the wall and not down, so perfect as a kitchen splash-back where you'll have a continuous design and no annoying joins for 4m

 

3D effect

 

Washable

 

Suitable for wet areas

 

Seal edges and joins

 

Durable

 

Realistic printing & designs

 

Design runs down the roll not across

 

Ideal splash-back solution over tiles

 

Glue required over tiles which we also supply

Preparation of under-surface and individual sections Surfaces (tiles or walls) should ideally be smooth, solid, dry and free of cracks and holes. Any uneven areas must be corrected by the use of appropriate filling material (e.g. Metylan surface filler for absorbent under-surfaces). Cut the first strip from the roll by placing the beginning of the pattern at the top and allowing a slight overlap at the bottom.

For absorbent under-surfaces, such as cement or plasterboard, use a normal commercial wallpaper paste for heavy-grade wallpapers (e.g. Metylan Special). Apply the paste to the cut strip, fold it together and allow it to absorb the paste for about 10 minutes.

For non-absorbent under-surfaces, for example oil-treated or painted areas, use normal commercial dispersion adhesive (e.g. Ovalit S). Moisten the rear surface of the strip with water, allow it to soak in for about 10 minutes and then apply the adhesive to the wall over the area intended for the cut strip.

You should always follow the application instructions provided by the adhesive manufacturer.

Application of wall covering

Apply the first strip, starting at the top, and ensure vertical alignment. Cut the next strips so as to ensure the alignment of the tile pattern, with the necessary overlap at top and bottom, and place it next to the previous strip after applying adhesive. Avoid the need to make joins in the corner the rooms.

Attention: Immediately remove any spots of adhesive with clean water!

Sealing

In particular in rooms which are subject to moisture, it is essential to ensure that all edges and joins are selaed with PVC cold welding paste (for PVC wall coverings). This prevents moisture from penetrating underneath the wall covering.

When finished, ensure that the room is well ventilated!

Cleaning and care

Ceramics is completely waterproof. It is therefore easy to undertake cleaning and maintenance. The cleaning can, for example, be carried out with mild liquid commercial cleaners, soapsuds or similar. Afterwards, always wash the wall covering thoroughly with clean water.

Warning: Always avoid contact with acetone, cleaning solvents and direct heat!

Replacement

Even many years later, it is easy to remove the PVC surface by separating it from the support paper at an upper or lower corner and pulling it in its dry state from the backing. The paper layer which remains stuck to the wall is an ideal under-surface for a subsequent wallpapering activity.

 

 

FEATURES & BENEFITS 

• Easy to apply, no need for a professional 

• Cost saving alternative to re-tiling, ideal for rentals 

• Realistic 3D designs on a 67.5cm x 15m roll 

• Horizontal application reduces number of joins 

• Water resistant - ideal for kitchens, bathrooms, utility rooms

 • Hard wearing 

• Wipe clean 

• Easy to remove 

• Instant transformation on a budget ! 

An ideal solution for covering over old tiles in your kitchen or a new splashback for your bathroom, this durable and waterproof 3D wallpaper is the perfect cover up!

The thickness of the paper and 3D texture makes it unnoticeable over flat tiles, you wont spot the grout lines PLUS another benefit is that the design runs down the roll not across, so no annoying joins or matching either!

This paper can easily be removed, simply pull the PVC surface from the support paper at the corner, the paper-layer which remains can be an ideal under-surface for another wallpaper or remove it completely.

Please follow our How to Apply guide for best application method.

Non adhesive (glue or paste required)

PVC compound & clear varnish surface

Thickness 0.60-0.90mm (depending on design)

Weight 280 360 g/m² (depending on design)

Wider width than standard wallpaper

3D effect

Realistic printing & designs

Suitable for wet areas when sealed

Seal all joins & edges using clear silicone sealant

Dry at room temperature

Durable

Washable

Use normal mild liquid household cleaners, wash off with clean water

Ideal splash-back over flat tiles

Glue required over tiles or normal wallpaper paste on walls (check pack instructions)

Avoid direct heat eg. gas hob, acetone & solvents

Recommend fireproof glass over wallpaper if applied in hob area

 

100% Official D-C-Fix Licensed Product

Easy to apply

Simply peel and stick

FREE UK Postage

.

 

Add a bit a class to your bathroom at a that is affordable.

We at eBathroomstore believe that luxury isn't a privilege but a necessity!!

We provide affordable luxury for all.

 

 

Our ebay shop exclusively sells the designs by ocean clam in our wide range of quality products at a that is affordable. We provide affordable luxury for all. We believe that luxury isn’t a privilege, but a necessity. Visit our eBay store now for your bathroom needs.