G6FGO BMW K1200LT iBus Radio Interface – Mk7 Blue-C – Basic Module Pack

This interface is available worldwide, but occasionally buyers tell me that eBay shows their country as excluded. If this happens, please message me through eBay and I will check the shipping options for you.

BUILT TO ORDER – typically around 5 days build time.

This listing is for the basic G6FGO Mk7 Blue-C iBus Radio Interface pack. It is suitable for all years and models of the BMW K1200LT.

This is intended for owners who are happy to make the four basic connections themselves rather than purchasing the optional Plug-and-Play installation loom.

THIS BASIC PACK INCLUDES:

Full documentation, firmware information and additional support material are also available through the AJL Electronics website.


NB. The Radio control lead IS NOT included in this basic pack. A suitable 3.5mm AUX lead can be supplied separately if required.



WHAT DOES IT DO?

The G6FGO interface allows a modern aftermarket radio head unit to be fitted to the BMW K1200LT while retaining operation from the original BMW handlebar and Stingray controls and the factory display.

The interface reads the control data already flowing around the motorcycle's iBus system and converts the original BMW button operations into the appropriate commands for the replacement radio.

Mk7 Blue-C uses direct radio control wherever suitable. Depending on the particular radio, this may use its SWC/REM control input or another supported control method.

Earlier generations of the interface used a small infra-red blaster for many radio types. Direct connection has now superseded this for normal current installations, although earlier IR-controlled radios can still be supported where appropriate.

RADIO COMPATIBILITY

The interface currently supports a wide range of Alpine, Pioneer, JVC, Kenwood and Sony radios, with further models added when practical.

Alpine remains my recommended choice for the K1200LT, as development and testing have consistently shown that Alpine radios generally offer the best control possibilities.

Supported Alpine examples include:

In practice, many other suitable modern Alpine head units can also be supported.

Other examples already supported include:

Pioneer

JVC

Kenwood

Sony

Radio manufacturers change their control systems from time to time, so if you already have a particular radio in mind, please message me before ordering and I will confirm compatibility. Resistive ladder control type radios are only now supported to special order.

New radio types can often be added to the software, especially if I can get one onto the test bench..

SPEED CONTROLLED VOLUME – SCV

The latest Mk7 Blue-C includes the long-awaited Speed Controlled Volume (SCV) facility.

When enabled, SCV automatically adjusts the radio volume according to the speed of the motorcycle.

As road speed increases, the volume is gradually raised to compensate for increasing wind and road noise. As the motorcycle slows, the volume is reduced again.

SCV is entirely optional and can be switched ON or OFF with one operation of the original BMW controls.

Once enabled it works automatically in the background. You can still use the normal volume controls at any time to choose your preferred listening level.

ORIGINAL BMW CONTROLS

The interface allows the original BMW controls to operate the replacement radio in much the same way as the original BMW unit.

Depending on the capabilities of the particular radio fitted, functions can include:

The exact functions vary slightly between radio manufacturers because aftermarket radios do not all provide the same remote-control facilities.

ORIGINAL BMW DISPLAY

The interface also continues to operate the original BMW display.

There is no return data connection from most aftermarket radios to the BMW iBus, so dynamic information such as station names, track titles and scanning progress cannot normally be displayed.

Instead, the interface intelligently follows your control operations and displays the expected source, band and preset information.

If the display and radio ever become out of step, they can easily be re-synchronised using the original BMW controls.

OPTIONAL CONTROL OUTPUT

The interface contains an onboard relay output which can be configured to control another device.

Possible uses include:

Heavy electrical loads should always be switched through a suitable external relay.

The function can be assigned to an original BMW button. On my own K1200LT, for example, I use the SC/RP button to operate the PTT of my communications radio.

HANDS-FREE TELEPHONE / VOICE CONTROL

Where supported by the chosen radio and telephone, one of the original Stingray controls can operate the radio's voice or assistant function.

With a suitable helmet microphone installation this allows the hands-free facilities of the replacement radio to be used without having to reach for the radio itself.

Available functions depend on the particular radio and telephone combination.

INSTALLATION

Installation of the basic pack is straightforward once the replacement radio has been fitted.

The interface requires only four basic connections:

Full colour-coded instructions are supplied.

For owners who prefer not to cut or solder the original BMW radio loom, an optional Plug-and-Play adapter is available separately.

The Mk7 Blue-C module is slim enough to fit in the radio housing and its USB-C connection allows future firmware updates without removing or dismantling the interface.

USB-C AND FREE FIRMWARE UPDATES

Mk7 Blue-C uses a modern USB-C connection, replacing the mini-USB connector used on earlier versions.

Development of the software is continuing. New radio compatibility, refinements and additional useful functions are added when practical.

Suitable firmware updates are supplied FREE OF CHARGE to registered owners.

Full firmware information, documentation and support material are also available through the AJL Electronics website.

PERSONAL SUPPORT

This is a specialist product, individually built, configured and tested before dispatch.

If you need help choosing a suitable radio, installing the interface, updating the firmware or simply working out why something is not behaving as expected, personal support is available 7 days a week as far as possible.

There is no charge for this support.

If you are unsure whether your particular radio is compatible, please message me through eBay before ordering.