Portable -8000VDC multi-purpose regulated power supply. Based on the EMCO / XP Power C80N high voltage DC converter module, this assembly has all the support electronics for a fully functional power supply. Also available as just a module. See my other listing. 

The output voltage is programmable using an onboard reference and potentiometer or can be remotely adjusted with an off-board potentiometer. Move one jumper block (JP1) to make the selection, ‘L’ = Local control, ‘R’ = Remote control. Simply add an external 10k potentiometer for remote output adjustment.

Applications include, but are not limited to, Photo Multiplier Tubes, Solid State Detectors, Electrophoresis, Piezo Devices, Capacitor Charging, Electrostatic Loud Speakers (ESL), and EO Lenses applications.

Check out the recently added video of arc testing!! be sure to turn up your speaker volume!

WARNING – this device produces dangerous voltages and is intended to be used by experienced individuals only! Use at your own risk!! Please be careful…..

Specifications:

Input Voltage: 11.5VDC to 16VDC

Output Voltage: 0 to -8000VDC

Output Current: 0.125mA

Power: 1watt

Regulation: < 0.75% Load, < 0.25% Line

Programmable Output Voltage: 0 to 100%

Adjustable Gain for Fine Tuning

Reliability: Rated at 2.6MHrs MTBF

Temperature Coefficient: <50ppm/degrees C

Shielded Case for lower EMI

Size: approximately 3 ½” x 2 1/4” x 1”

Ripple: <0.2%

Minimum Load: No minimum load required

Switching Frequency: 100kHz-150kHz

cUL listed module

CE Marked module

Shipping inside the continental US only please.