Furthermore, the CT3 offers 3 programmable selections enabling you to test your MDB equipment in real life situation and even more than one at a time.
*Note. To test any validator that is not MDB, you will need to get the External
Bill Validator Module, or EBVM (part number A01070), in order test your
110 volt and pulse bill validators. The EBVM plugs directly into the CT3
tester. The tester without the EBVM will test all coin changers. No
extra module is needed for coin changers. The EVBM can be purchased here: https://www.ebay.com/itm/226429654033
| Part number | A00885 |
| Protocols supported * | Single price |
| Logic/Micromech 12/15 pins 24VDC et 110VDC | |
| MDB Coin Level 2-3 | |
| MDB Bill Level 1 | |
| MDB Card Level 2 | |
| Pulse type with optional EBVM interface for following models : | |
| Ardac USA | |
| Ardac ABA | |
| Coinco BA30SA | |
| Coinco BA32SA | |
| Conlux/Maka NB/NB2/NBE (120 volts) | |
| Maka MKA/NBV | |
| Mars VFM Series | |
| Mars VN2500 | |
| Mars GL4/GL5 | |
| MEI Series AE |
|
| Display | LCD Green 2 X 20 |
| Test modes | Manual, auto-test & simulation |
| Number of vend prices | Three programmable, on simulation mode only |
| Calibration mode | Yes, for some Micromech/Logic and MDB |
| Dimensions HxWxD | 7 1/8'' x 7'' x 9¼'' (181 x 177 x 232mm) |
| Power | 120 Vac 60 hertz |
| Shipping weight | 10lbs (4.5kg) |