It is highly recommended that you change your filters every 3 to 6 months for optimal performance of your Shark vacuum.

Compatible with Shark Navigator Lift-away Models: AX912, NV680, NV681, NV681C, NV682, NV682Q, NV683, NV800, NV800W, NV801, NV801Q, NV803, QU922Q, UV810

 Replaces for Shark Part Numbers： XHF680, XFF680

Find My Model Number

1. Check your box

On the bottom of your box, you should see the model number near the bar code.

2. Check your unit

The main body of the vacuum (back of the unit) should have a rating label that features your model number.

3. Check your manual Your product's model number is listed on the front cover of your instruction booklet.

【Same Size & Thickness as Original】: The same size and thickness as original filters, make sure the filters are compatible with the shark machine; The seal is just right and will not be very tight, same the suction as original. The air circulation is good and it can be easily pulled out without damaging the machine.

【Easy to Install & Clean】: Can be installed in less than a minute, easy to cleaned & reused, just clean them with clean water and let them dry completely, and then you can use them again. But for the best performance, recommended to replace the HEPA filter every 6 months, replace the foam and felt filters every 3 months. If you have any questions about replacement parts, please feel free to contact us.

Package Includes:

HEPA Filter x1

Foam Filters x2

Felt Filters x2