Here at MadMopeds we only supply parts that we use on our own bikes and our customers bikes in our workshop so you can be assured of them being of good quality.

These almost impossible to find filters are for the Suzuki GT250 twin and the GT380, GT550 and GT750 triples fuel taps.

These will go very quickly at this price!

* The OEM part number was 44322-31015 but the 'new' original 8.3 or 8.4mm outside replacement filters are actually too loose in the casting 😭

Note, we have not measured a J,K model triple tap with 3 fuel outlets to check the sizes. Message us if you are able to accurately measure one for us please :)

PLEASE DO NOT BUY THESE UNLESS YOU HAVE ACCURATELY MEASURED YOUR TAP.

WE DO NOT ACCEPT RETURNS OR 'DOES NOT FIT' CLAIMS ON THESE. SORRY

They are the best available and are suitable for both the 7.0 mm external diameter brass petrol pipe and the 8.5 mm hole in the casting on the original OEM vacuum type fuel taps. 

See our pictures of our filters fitted on one of our taps.

You are buying 2 two filters that are 38 mm long.

We have done our homework on these and they will not be too big on the pipe or need to be glued on 

These ones are a good tight fit inside the body or casting of the tap.

For the casting filter, depending on how much corrosion your tap has and the hole size, warm the thick end only of the plastic up in a cup of boiling hot water for 2 minutes to push it inside. Reduce the diameter with sandpaper if your casting size is as new.

DO NOT use heat guns on these filters

Note --- We also have filters in lots of other sizes for other taps too.

SEARCH FOR FILTER SET within our shop search bar.

Measure the size of the hole in your casting and the brass tube (measure very accurately please with calipers)

We also sell excellent quality replacement petrol taps for all of the models listed above should you not be able to find all the spare parts required to refurbish your OEM Tap. We also sell tank to tap seals

We can also supply you with the best quality heavy wall thickness fuel pipe and stainless steel clips to suit your OEM or new tap. Our pipe is E5 and E10 petrol compliant  so please see our other listings if you need some.

Dispatched using 2nd Class large letter postage. If you need it faster please select the 1st class postage option for only £1 extra.... But sometimes 4 or 5 days faster

MadMopeds UK