Brake caliper adapter for the front axle of the BMW E30 series with original 4-hole connection to drive the brake disc from the Fiat Coupe 284x22mm in conjunction with the brake calipers from the BMW E36.
Required components:
- BMW E36 brake calipers, part number: Right: 34111160346 / Left: 34111160345
- Brake caliper carrier BMW E36, part number: 34111160347
- Brake discs from Fiat Coupe 284x22mm part no. 46403958
- The brake discs must be rebored to the BMW bolt circle 4x100 and the hub diameter must be turned up to 66mm (can also be done in-house, (link not available) )
- the brake calliper brackets need to be machined a little so that they do not touch the wheel bearing housing
Advantages:
- 15-inch rims can be driven
- Extreme deceleration values
- Thanks to the material certificate included in the scope of delivery, registration via individual approval is also possible for standard vehicles
- Fits directly on the above-mentioned models and can therefore be easily retrofitted to the original condition at any time
- Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no rewelding, re-milling or re-drilling.
Scope of delivery:
- 2x brake caliper adapter for BMW E30 316i, 320i, etc.
- High-strength screw set
- Material certificate
15-inch rims can be used with this brake caliper adapter
Your advantages
- Einfache TÜV Eintragung
- Qualität Made in Germany
- Faire Preise ohne Zwischenhandel, du kaufst direkt beim Hersteller und Enwickler des Produktes
- Weltweit Nr 1 in Sachen Tuning Adapter
- 15 Jahre Expertenwissen
- 10 Jahre Garantie
Reviews
- von Bram am 12.05.2024Het is leek mij een simpele ombouw, maar er kwam nog best veel bij kijken om het allemaal passend te krijgen. De remzadel moet flink aangepast worden om aan de adapter te bevestigen en de adapter moet ook een beetje bewerkt worden omdat de remklauw anders niet past.
FAQ
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: (Link nicht verfügbar)
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the (Link nicht verfügbar) :
Why should you buy from us?
Adapter Made in Germany Beware of inferior quality copies. Unlike other manufacturers, we produce not in low-wage countries. Our products stand for high-quality materials and more precise processing through the latest machine technologies.
Easy TÜV registration We have been officially certified as a manufacturer by TÜV SÜD. This enables the expert to make an easy entry. In addition, we supply a certificate for many products.
Technical Support - Our professionals will continue to support you after your purchase We develop our products ourselves. This means we know the intended use and can respond perfectly to our customers' questions.
100% satisfaction guarantee We want to convince you of our quality and our service. That's why we've extended the return policy from 14 to 100 days