3D Pole / Mast Mount Holder for Bobcat Hotspot 300 Stock Antenna Helium LongFi

Custom 3D Printed part designed by Arcady Genkin - find the free source file online! 

Re:

Bobcat Miner 300 hotspot comes with a fairly good stock antenna. Unfortunately, the antenna has a flat base that is meant for placing the antenna on a horizontal surface, such as a window sill. I wanted a more permanent way of mounting the stock antenna, so I designed this mount. With it, the stock antenna can be mounted on any round or square pole, mast, or rod..

Overall Description

The mount can be used indoors or outdoors (the stock antenna is weatherproof). The mount is attached using two or three ziplocks. If you are paranoid about a hurricane stripping the antenna off the pole, there are two holes that can be used to put a couple of screws into the pole. The stock antenna is securely mounted inside the mount, held in by three M3 screws.

Required Hardware

You need:

• Three M3 screws, 10 to 16 mm long.
• Three M3 square nuts (normal profile).
• Ziplock ties to install the mount.
• Optionally – one or two self tapping screws to secure the mount on the pole.
•