eBay

Ram 94-97 Single Gauge Pod/Switch Plate Cup Holder Angled

Looking to upgrade your Ram? This custom 3D printed part replaces the cup holder to run one 52mm gauge. The design screws into the cup holder mounting spots and doesn't require any cutting or drilling. The pod is angled at the driver for quick viewing. It will work on any second generation Ram pickup 94-97 1500,2500 or 3500. It will not work on any other Ram pickup.

No cutting or drilling is required! The design mounts in the factory cup holder with included mounting hardware
Fits one 52mm or 2 1/16 gauges
Design has a smooth front face that matches the interior well
Commercial grade material: Made out of black ABS plastic, which is the same material most automotive interior plastic is made of
OEM interior parts are 3D scanned for a factory fitment
Gauge pod finish is a matte/satin which compliments the interior
Manufactured to stand up to any interior temperature.
Made in the U.S.A.
Designed by a Gearhead for Gearheads!

This is a raw 3D printed part you will see small lines leftover from manufacturing. My equipment and material produce a part that looks like a factory piece. I prefer the 3D printed look but the part can be sanded and painted to your preference.

Installation is simple and requires basic hand tools. Remove the dash trim and the cupholder. Be careful removing the dash trim. The second gen trucks are notorious for brittle dash plastic. Install the design in the cupholder slot using the supplied hardware. My design is meant to fit snug in the dash trim to avoid any rattles.

I designed this with a 52.5mm hole for the gauge. Not all gauges are 52mm be sure to test fit your gauge DO NOT JUST PRESS IT IN. If you feel heavy resistance inserting the gauge, the design will need sanding or you have a gauge larger than 52mm. My gauge pod designs are meant to fit snugly so you don't have any rattles or noises. Inexpensive gauges are either larger or smaller than 52mm. If your gauge is loose add a layer of tape until it fits.

Looking for more custom 3D printed parts? Check my account for other designs. I make designs for many different vehicles and I’m always creating more!

Questions? Send me a message, I want to make sure this is the right fit for what you need.

Do you sell files?

Ebay is a platform for selling physical items. While many 3D designs are shared or sold on file sharing sites I only sell finished prints. All listings in my shop are original designs and are not available on any file sharing platforms. I encourage anyone with a 3D printer to learn how to 3D design.

Disclaimer: This listing is only for the 3D printed part. It doesn't come with the gauges or any interior trim.

Welcome to Driven2Print! I’m a Chicago based gearhead with a passion for 3D printing. I have 15+ years of professional experience in the printing and design industry. I use commercial grade printing equipment and high-quality materials for all my parts.

Every item in my shop is a custom part that takes many hours and revisions to develop. All of my designs start with OEM parts to create the best possible fitment. I take the time to measure, design, revise, test, and generally obsess to make sure that it fits like it came from the factory. I focus on quality. If I wouldn’t put it in my own car, I won’t sell it.

Just like with many aftermarket automotive products there are many cheaper imitations. Lower-priced listings are out there that are similar to my products. Some are exact copies of my own designs and photos. But they’re cheaper for a reason - they aren’t made with high-quality materials, they won’t fit as well, and they won’t hold up. Buy with confidence from my shop.