We are a genuine UK seller with UK stock!

Check out our fantastic feedback on petrol taps!

We can get this to you usually within 3 or 4 days but if you need it quickly, please select the 1st class postage option on purchase.

Here at MadMopeds we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!

This new VACUUM OPERATED tap will fit and replace the vacuum operated Taiyo Giken one on your

Kawasaki

* ZR7 750, ZR-7S

* ZR400

* Z750 LTD 1982

* Z750S 1981 see pictures

THIS DOES NOT FIT 550 and 1100 ZEPHYR But we have a non vacuum type tap that does

Note : We also sell non vacuum type taps for your bike should you want that type. See our other listings.

This is a brand new reproduced fuel tap and it has the following settings... ON, PRIME and RESERVE.

It looks very much like the original apart from  the vacuum port exits on the right hand side rather than the rear.

Note that this tap has the fuel outlet on the right hand side just like the original.

The casting of our taps is superb and they are all checked for smooth operation before dispatch.

Please take a good look at the pictures of our taps and see if you can find better castings elsewhere!

Don't mess about trying to reseal your old original fuel tap. We've tried all that and it just doesn't last. They generally leak through the front or the vacuum side goes wrong and either stops fuel from flowing through the tap or it constantly supplies fuel which floods carburettors and fills crankcases up with petrol.

Replacement seal kits are expensive too.

Apart from that it's not worth wasting time even trying to fix them when you can buy something like this from us!

OK so this tap not original Kawasaki but it is a much cheaper alternative than trying to get an original one.

Our taps are as good as you are going to buy, we've searched high and low for a long time for taps for these bikes plus other classic bikes that are just right and these are the best!

We check each tap before dispatch for any casting errors and tightness of the tap.

To date, we have had no returns or issues with my supplier and manufacturer.

Fitting this will eradicate all the usual problems of old taps not working and fuel not flowing or leaking taps.

Technical specifications:

These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!... and binned them!

Hole diameter is 6.5mm for your 6mm bolts

Connection to fuel line: 8mm internal diameter fuel pipe.

NOTE THAT THIS MAY BE SMALLER THAN THE PIPE CURRENTLY ON YOUR BIKE BUT CHECK

We recommend that you renew your fuel pipe and we also sell very good quality clear heavy wall thickness and E5 and E10 resistant fuel pipe too

See our other listings for good quality 7 and 8mm pipe and stainless steel clips to suit this tap and your carburettors

Our taps are obviously supplied with a tank seal too. We also sell replacement tank seals should you paint your tank or need to remove your tap for tank washing or cleaning.

Please compare yours and your petrol pipe and vacuum pipe routing with my pictures before purchase. Some models had vacuum pipes pointing downwards like ZR7-S for example.

Dispatched with 2nd Class parcel postage unless you require 1st class delivery at £2 extra.

Please could you make your selection on purchase.

MadMopeds