We're a genuine UK seller with UK stock!

We sell thousands of petrol taps so check out our fantastic feedback!

We can get this to you usually within 4 days but please pay the extra £2 for Tracked24 1st class if you need it faster.

Fits Suzuki DR-Z400 DRZ400E and replaces OEM part 44300-29F10 or 44300-29F00

MESSAGE US BEFORE YOU BUY THIS IF YOU WANT ONE FOR THE DRZ400SM SUPERMOTO BIKE AS THE TAP IS SLIGHTLY DIFFERENT FOR THAT MODEL

This tap can be used on some of the long range Enduro tanks too.

NOTE some of the original taps had a 90 degree fitting at the bottom and this tap has a straight downwards outlet. See our images.

Some DRZ's had a vacuum operated tap.

This is a NON vacuum type but directly replaces the vacuum type. You must block the vacuum line if you use our tap.

Message us if you prefer the vacuum type please.

This is a brand new reproduced fuel tap that fits the Suzuki models listed above. These taps have ON, OFF AND RESERVE settings.

This has an 8mm fuel outlet and you should consider changing your pipe for ethanol E5 and E10 compliant type. On the Dual Sport the original pipe fits really nicely if it's in good condition, see our pictures.

We do sell the very best quality heavy wall thickness E5 and E10 compliant pipe in green tint to suit both the tap and your carburettor.

Don't mess about trying to reseal your old original fuel tap. We've tried all that and it just doesn't last. They generally leak through the front or stop flowing fuel or just flow continuously.

Also the Suzuki seal kits are an expensive gamble too if you can even find them because the inside of the tap will require a day of ultrasonic cleaning to get the hardened gunge and crystals out before you can even think about fitting the new seals!

Our taps are as good as you are going to buy, we've searched high and low for a long time for manually operated taps for these bikes that are just right and these are the best!

We check each tap before dispatch for any casting errors and tightness of the tap.

To date, we have had no returns or issues with our supplier and manufacturer.

Fitting this will eradicate all the usual problems of the vacuum not working and fuel not flowing or leaking taps.

These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. We've bought them!

* Connection to fuel line: for 8mm internal diameter fuel pipe

Our taps have a filter bowl on the bottom and there is an internal mesh filter within the bottom of the tap (see our images) remember to keep this clean, plus the tank internal syphon pipes also have filters.

We sell replacement in tank filters for these taps too.

Dispatched with Tracked48 2nd Class parcel postage.

Tracked24 1st class postage is only £2 extra.

Please could you make your selection on purchase.

MadMopeds UK