Features Four blocks of timing 1, 2, 4, 8 hours, timing switch, flexible setting time
Switch using excellent switching power IC, linear distance of 30 meters to receive
Excellent receiving IC, stable voltage reduction, strong sensitivity of receiving, more safe and durable
Configuration of remote control base, can be fixed on the wall, the remote control on the base, the remote control is not easy to lose.
Ceiling fan light special remote control and receiver set, suitable for home, office, hotel, club, restaurant, exhibition hall and other places
Specification
Product name: wireless digital remote control (ceiling fan light special)
Controllable line: 2 way (1 way light, 1 way fan)
Speed control function: three speed adjustment (high / medium / low)
Working environment: <80 ° c
Battery type: AAA battery
Timing time:1/2/4/8 hours
Rated frequency:50Hz-60Hz
Rated voltage:110V/220V
Load power:Total power:1000w
Remote control material:ABS
Shell size.
Transmitting:about 13.6*5*1.8cm
Receive:about 11.6*5.3*2.7cm
Remote control function.
Manual function, power on the light!
Press the remote control "ON" key to open
Press the remote control "OFF" key to turn off
Note
1. Receiver plane up, can not be installed backwards to avoid the impact of the cover and the ceiling is not flat
2. The receiver is divided into input and output, the input and output wiring is strictly prohibited
3. Please use in the working voltage
4. If the fan has a pull cord switch and remote control receiver, please pull the fan's pull cord switch to the highest level, the light switch to the light on state before the remote control
5. Please check the wiring against the wire color and the instructions on the sleeve to wiring
6. When using the remote control, please check whether the right battery is installed (note the positive and negative battery poles), the handle control key will flash every time you press a key.
Instructions for use
1. When the transmitter can not remote control the receiver, please check whether the switch battery contact is normal, whether the positive and negative poles are correctly placed, and whether the power is sufficient.
2. When the transmitter can not remote control the receiver, please check whether similar remote control products exist in the vicinity, and check whether their transmitter keys are pressed, because the same nature of the remote control products at the same time to transmit radio waves will cause mutual interference, affecting the reception effect, excluding the remote control function will be restored to normal. (Infrared remote control is not included)
3. Please use the product within the allowed voltage range, if the voltage is too low, the remote control will not work. (Voltage range and related parameters are stated on the product label)
4. Please take out the transmitter battery when it is not used for a long time.
5. Each road load requirements: lamps and lanterns bulbs ≤ 1000W or H-tube ≤ 280W, the number of branches ≤ 5 or energy-saving lamps ≤ 200W, the number of ≤ 6
List
1 x Receiver
1 x Remote control
1 x Remote control base
(AAA batteries not included)