1-OHM MINIMUM IMPEDANCE STABILITY
An amplifier’s impedance stability is its ability to continuously power speaker(s) of no less than the given impedance per channel, without the risk of damage. Subwoofers are available in various voice coil configurations and impedances, so be sure yours will be no less than 1-ohm.
ACTIVE 12DB/OCTAVE CROSSOVERS & PHASE SHIFT
Active crossovers built into an amplifier are the most efficient type of crossovers to use in-car audio systems. Active crossovers protect speakers from damage by harmful frequencies and preserve optimum performance.
LOW-LEVEL RCA INPUT & PRE-AMP OUTPUT
Connect the low-level (pre-amp) audio output of the car stereo to the amplifier, using good quality twisted pair RCA interconnect cables. The amplifiers pre-amp output daisy-chains the audio signal to multiple amplifiers of complex audio systems.
SWEEP Control
selects the frequency boosted by the equalizer. This is the “center frequency,” which can be as low as 27Hz or 63Hz. Choosing this frequency depends on your taste in music.
WIDTH Control
increases or decreases the bandwidth range, or “Q,” boosting frequencies near the “center frequency.” Narrow Q focuses on harmonics immediately surrounding the center frequency. Wide Q unlocks harmonics all around the center frequency.
MAX BASS INDICATOR
lights above the equalizer controls are a visual representation of the boost level. Bright, continuous illumination indicates maximum bass enhancement levels have been reached. Remember, more isn’t necessarily better…
DASH MOUNT CONTROL
included with this amplifier can be mounted anywhere in the vehicle, but near the driver seat is recommended. The output level of the Bass Equalizer can be controlled, as well as the amp.