Tolerance :

+/- .02 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical

• Material: Brass

• Vibration: Fair resistance.

• Pressure: Maximum operating pressure of 150 PSI.

• Temperature Range : -400 F to +2000 F (-400 C to +930 C).

• Used With: NT Nylon Tubing - SAE J844 Type A and B.

Conformance

Meets specifications and standards of SAE and DOT FMVSS 571,106.

Advantages

Easy to assemble (no tube preparation or flaring required.) Built in tube support. Fittings utilize a ribbed sleeve for compression and positive grip. May be used with copper tubing by replacing nut, sleeve and insert with long nut and spherical sleeve. Insert should be removed for copper tubing use.

Assembly Instructions

1- Cut tubing to desired length.

2-Slide nut and then sleeve on tubing. Threaded end of nut “A” must face toward fitting body.

3-Insert tubing into the preassembled fitting. Be sure tubing is bottomed in fitting.

4- Tighten nut to required torque as indicated on chart.

Disassembling: 

Remove nut and pull tubing out of fitting body. Insert will remain in tubing.

Reassembly: 

Push tubing and insert into fitting body until it bottoms. Thread nut onto fitting body.