Here at MadMopeds we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!
This will fit your Honda CG125 OR CB125 or CBF125 if your tank has a 16mm thread.
Please check because some tanks have a 14mm thread and we can supply those too.
This is a brand new reproduced fuel tap and it has the following settings... ON, OFF, RESERVE.
We are a genuine UK seller with UK stock!
We can get this to you usually within 3 or 4 days but if you need it quickly select the 1st class postage option.
Here at MadMopeds we don't just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!
Note that our tap has the fuel outlet on the right and a fuel strainer bowl on the bottom. The bowl is made from metal and not plastic like some others are.
Our front plate is screwed too. This is better than the originals because ours can be cleaned and serviced!
The casting of our taps is superb and they are all checked for smooth operation before dispatch.
Please take a good look at the pictures of our taps and see if you can find better castings elsewhere!
Don't mess about trying to reseal your old original fuel tap. I've tried all that and it just doesn't last. They generally leak through the front or just get bunged up. Also the seal kits are expensive too.
Apart from that it's not worth wasting time even trying to fix them when you can buy something like this from us so cheaply !
OK so this tap not original Honda but it is a much cheaper alternative than trying to get an original one. These are better than the originals!
Our taps are as good as you are going to buy, I've searched high and low for a long time for taps for these bikes that are just right and these are the best!
We check each tap before dispatch for any casting errors and tightness of the tap.
To date, we have had no returns or issues with my supplier and manufacturer.
Fitting this will eradicate all the usual problems of old taps not working and fuel not flowing or leaking taps.
Technical specifications:
These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!... and binned them!
This will be a direct fit on your bike.
Connection to fuel line: 6mm internal diameter fuel pipe.
Main thread size is 16mm x 1.5mm thread.
PLEASE CHECK YOURS BEFORE PURCHASE
We sell good quality heavy wall thickness clear or green tinted E5 and E10 resistant 6mm fuel pipe too if you need it.
We do recommend changing your old fuel pipe and fitting an inline fuel filter.
We sell filters also
Please compare yours with my pictures before purchase.
Dispatched with 2nd Class parcel postage
1st class delivery is £2 extra, please could you make your selection on purchase.
MadMopeds