Here at MadMopeds we love solving engineering problems. We only sell products that we are confident will meet our own quality standards which are very high.

We are a GENUINE UK BASED seller with UK stock!

Check out our excellent feedback too on these Suzuki GSXR400 taps.

We can get this to you usually within 3 or 4 days, we usually post every day. Please select the 1st class postage option if you want it quickly.

This will fit your Suzuki GSX-R400 GK76A

Please compare the pictures with yours to ensure that it will fit your bike. This is not the same as the original but has 2 fuel outlets plus a vacuum connection.

If you are looking for a tap for your GSX-R400 with only ONE FUEL OUTLET then see our other listings as we sell those too.

This is a brand new reproduced fuel tap and it has the primer setting so that you can prime the carbs without running the bike.

Note that our tap has the fuel outlets on the left and right and the vacuum pipe on the rear.

NOTE... YOUR ORIGINAL IS DIFFERENT.

PLEASE DO NOT BUY THIS UNLESS YOU HAVE LOOKED AT YOUR TAP AND SET UP AND UNDERSTAND THE CHANGES THAT YOU HAVE TO MAKE TO FIT THIS TAP AND PIPE IT UP.

We sell good quality and E5 and E10 resistant fuel pipe to suit this tap if needed.

You will need to renew and extend your vacuum pipe.

Don't mess about trying to clean, scrub or pay a fortune to ultrasonically clean and reseal your nearly 40 year old original fuel tap. We've tried all that and it just doesn't last. They generally leak through the front and are corroded inside anyway or they flow fuel continuously. Old petrol tends to crystallise inside fuel taps and carburettors. Also the petrol fuel seal kits are expensive too if you can even find them.

Our taps are as good as you are going to buy, I've searched high and low for a long time for taps for these bikes that are just right and these are the best!

We check and fettle each tap before dispatch for any casting errors and tightness of the tap.

To date, we have had no returns or issues with my supplier and manufacturer. Nobody who has bought these from us has had a problem with fuel flow or quality.

Technical specifications:

These taps are very well made with very good casting material and tolerances, they are not made from 'monkey metal' like lots of other cheap taps are. I've bought them!

* Mounting Hole spacing is 44mm

* Hole diameter is 6.5mm for your 6mm bolts

* Connection to fuel line: 7 mm internal diameter fuel pipe

* Vacuum connection: 5 mm internal diameter pipe to your carburettor.

Our tap has an internal syphon pipe and filter. We wouldn't recommend relying totally on that as you don't want to be removing this tap once it's fitted and sealed so we recommend that you fit good inline filters too.

We have inline filters, top filters and spare tank to tap seals in stock too if you decide to remove your tap in the future for tank washing or re painting.

Dispatched with 2nd Class parcel postage unless you pay £2 extra for 1st class tracked

Make your selection on purchase please.

MadMopeds